Model #11022974103 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

On a Kenmore washer model 110.22974103 with agitator problem

A:

Detailed instructions can really come in handy when making some checks on your washer and I will be happy to help. I did some research and I was able to find a link that will guide you in checking the dogs. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
May 20, 2013
A:

I know that it can be very difficult to have issues with your washer. To remove the auger and agitator:

  • Pry the agitator cap off (key # 25).
  • Use a 1/2 inch drive ratchet with extension to place down the center of the agitator to remove the stud and washer assembly (key #2) by turning it counterclockwise (CCW).
  • Lift the auger off (key # 12).

If you need to remove the agitator (key #20) remove the bolt (key #2) and lift the agitator up and off. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 21, 2013
See more answers

Top Parts