Model #11022922100 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Bleach Dispenser Problem 11022922100 Kenmore Washer

A:

Thank you for choosing Sears and contacting us with your question about your Kenmore washer model 11022922100. I am so sorry the bleach is draining straight to the floor. I know you want to get this issue fixed quickly so you can get your laundry done, not to mention prevent damage to the floor.  I will be happy to help you with this. 

Since the issue is not a water leak, but an issue with the bleach only, I suspect that either the dispenser is clogged or the tub ring is damaged. It is important that only chlorine bleach is used in the bleach dispenser and not color safe bleach. Color safe bleach is thicker and should be put directly in the tub. This thicker bleach can clog the bleach dispenser causing it to leak. If a clog is not the issue, then the tub ring may be cracked or broken. I have included a link below for you to view the part. It sits below the bleach dispenser and directs the bleach into the tub. 

If the tub ring needs to be replaced, you can use the link to order the part. I have included the link below to our washer repair guides. There is one for replacing the spin basket in a top-load washer. Although you would not need to replace the basket, part of the process to access the basket is to remove the tub ring. You can use this guide to help you with your repair. Keep in mind that the washer in the guide is not the same model as yours so some parts may be different. You should still be able to get helpful tips from the guide. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. Internal parts may have sharp edges. Use caution and wear work gloves to prevent serious cuts. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME).

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
July 29, 2015
A:

Rachell, thanks for the response. I don't think the links are relative to my washer model 110.22922 100 I think my washer has a tube from the bleach dispenser to the bottom of the tub assembly and the front of my washer appears to pivot forward along with the top for getting to the inside. I've been trying to find a schematic to confirm what I suspect but it's a swamp of unhelpful information on the internet.

Read More
Wayne -
July 29, 2015
See more answers
Q:

How much water does this use for one full load 11022922100 Kenmore Washer

A:

Thank you for your inquiry on your Kenmore Washer, Model: 110.22922100. From reviewing the details on your model, unfortunately we don’t have the specification on how much water your washer would use in a full load. 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 09, 2015
Q:

my kenmore washing washes, but not clean. I have to push the cloths down in the water. the aggitator is not strong. do I have a belt problem? 11022922100 Kenmore Washer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 11022922100; this unit does not use a belt. It has a motor coupling from the motor to the transmission. If the motor coupling is damaged it won’t spin or agitate. If it’s just no agitating sufficiently it could be the agitator clutch is worn out. I linked a diagram below. The agitator clutch is number 20.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
December 08, 2014

Top Parts