Model #11020954994 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a Kenmore washer model 11020954994. The water and the agitator turns on at the same time. Is it a timer issue?

A:

I'm sorry to hear that you are having some difficulties with your washer. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Barbara H. -
January 06, 2012
A:

The link you provided is perfect match for the issue I am having. However that link doesn't really say what fixed it. Is it the water level switch or the timer?

Read More
Shanu -
January 06, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the washer. I suspect one of two parts has failed in the washer. They are the water level switch or the timer. To determine which part failed you will need to unplug the washer from the wall. Then open the console using the instructions below. Once the console is opened, remove the wires going to the water level switch. The water level switch has the small clear hose attached to it. Once you have the water level switch disconnected close the console and plug the washer in. then start the washer in a wash cycle. If the washer still agitates, the timer is defective. If the washer does not do anything, the water level switch is defective. You can order the parts from our parts website: Sears Parts Direct .

I hope this is helpful. Please let me now if you need further assistance on the washer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 08, 2012
See more answers
Q:

What is the capacity of my Kenmore Elite washer model 110.20954994?

A:

What is the capacity of my Kenmore Elite washer model 110.20954994?

Your washer is 2.5 cubic feet.

Read More
Korinna S -
Sears Technician
February 01, 2010
Q:

Can I replace the (shield, tub to motor) on my washing machine without taking the tub off?

A:

You will not have to remove the tub in order to install the tub to motor shield; however you will need to remove the washer cabinet in order to slide it back in position.

Read More
Joey S -
Sears Technician

Top Parts