Model #11020932990 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

water does not fill, hot or cold 11020932990 Kenmore Automatic washer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 11020932990 and if you can hear buzzing this would indicate that the solenoids are being energized. It Is possible that the valve has failed or there is not water entering the machine from the wall valves. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 01, 2014
Q:

Kenmore Elite Washer Spin cycle does not run 11020932990 Kenmore Automatic washer

A:

A washer is definitely something we depend and when starts malfunctioning it can be a big inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Yadira B -
October 17, 2012
A:

Hi,

Thank you for your question, and I would like to answer the question this way.
The washer is a direct drive so the motor is coupled to the transmission. The drive block is coupled to the basket by a block drive. Some questions need to be answered, when the motor will not spin does it HUMMMMM? This unit has no belts, so you are looking at
1. Something between the basket and the tub.
2. The block drive is slipping on full load, is the unit noise from the basket area?
3. The clutch is faulty.
4. What is the amp draw of the motor?

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.
Thank you for using Manage My Life.

Read More
Bill__W -
Sears Technician
October 17, 2012
See more answers
Q:

Kenmore Washer Cubic Capacity

A:

Wanting to know the cubic capacity on your Washer is really great to know. While you are waiting on an expert to answer your question, I suggest you visit Sears Parts Direct to speak with a Sears associate to find our the cubic feet. I have attached the link below. Hope t his helps!

Read More
Dezeray S -
March 21, 2012
A:

That model of washer has 3.2 cu. ft. of capacity.

Read More
Lyle W -
Sears Technician
March 22, 2012
See more answers

Top Parts