Model #11020852991 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My washing machine stops at the spin cycle. 11020852991 Kenmore Washer

Q:

Washing machine does not spin 11020852991 Kenmore Washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the washer.
 
Glad to help out.   Im  looking at your Kenmore Washer model number 11020852991.

Make sure the lid is closed well.  At times it can be a lid switch problem.

There are two things that I would look at.   The first and most likely is the coupler.   You will see that between the motor and the transmission.   It is the main item that spins the tub.  There are 2 plastic pieces on the outside with a rubber piece in the middle.   

The second thing to look at if the coupler is good is the clutch right there at the top of the transmission.
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 
 
 
 

Read More
Larry L -
Sears Technician
June 25, 2014
Q:

Why is my washer leaking from the bottom?

A:

Water can travel all directions so finding the source of a leak is not always easy. I see you checked the hoses and fittings. I attached two links that may provide some additional places to check while you wait for the expert. I attached the links below. I hope these help to find and stop that leak.

Read More
Barbara H. -
June 07, 2012
A:

Thank you for submitting your question. If the washer is leaking from under the machine, it could be leaking from the pump or the hoses connecting to the pump. The image provided below will instruct you on how to remove the cabinet from your washer to check the pump and hoses. You'll want to make sure the hoses are clamped securely. You can also run the washer an on small low speed cycle to see where the leak is generating from. I hope this information helps. Please reply back to this thread of you require further assistance. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
June 11, 2012
See more answers

Top Parts