Model #11020422990 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator/basket/tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

how to install a lid switch 11020422990 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to install the lid switch on your washer. I did look into the model number you have provided and I have found information to assist you. 

Click here for the video. 

Let me know if this helps.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 
 

 

Read More
Natasha12 -
Sears Technician
July 15, 2014
Q:

Washer not finishing it's cycle

A:

The washer leaving your wash soaking is not a good laundry day. While you wait for the expert, you might check the first link below. It is a similar problem. If you do find a technician is needed, the Sears Home Services link below can help.

Read More
Barbara -
August 04, 2013
A:

Thank you for your question. The lid switch has to be closed for the drain and spin cycle on your washer to work. If the lid switch is faulty, it will fill and wash but nothing else. A quick check you can do is to jump the lid switch and see if it will drain. If the washer operates, the lid switch needs to be replaced.

To jump the lid switch you need to unplug the washer and open the console. I have provided you with the instructions for opening the console below. Once you have the console open, locate the connector for the lid switch. Place an insulated jumper between the two colored wires. Not the green it is a ground and will cause a short. After inserting the jumper make sure it will not touch anything metal, plug the washer in. Start the washer in a drain cycle. If the washer drains and spins, you need to replace the lid switch. Do not leave the jumper in while you are waiting for the part.
Click here to watch a video.

Get your new lid switch here www.SearsPartsDirect.com

If you have more questions reply to this post.

Thank you for choosing Manage My Life.

Read More
dtova00 -
Sears Technician
August 05, 2013
See more answers
Q:

Washer not running 41748102701 Kenmore Washer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
July 21, 2013
A:

I have the 11020422990 Kenmore it wash but do not empty what to do?

Read More
raymond -
July 21, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when you are having so much problems with the control board.  Stopping mid cycle could be one of two problems.  The Control Board or the lid switch.  However, with the light problem and all, it is controlled by the Control Board so wil lhave to assume that it is the problem for all.

I will show you the link which may help you take the panel control apart and fix it yourself.  Hope it helps.

http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Washer-Parts/Model-41748102701/0582/0153200/R0709094/00001?blt=06&prst=0&shdMod=41748102701

http://www.searspartsdirect.com/partsdirect/part-number/134732919/0026/417?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=134732919&sid=MMLxexpertmerch

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
July 22, 2013
See more answers

Top Parts