Model #11016922500 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Miscellaneous Parts, Optional Part
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is my washer not coming on?

A:

Please see the images provided for the information that you requested on accessing the lid switch for replacement. The lid hinge screws are part number 355274, order 2.

Read More
biker dave -
Sears Technician
February 16, 2009
A:

I ought to have responded before this, but this was the solution for my problem

Read More
NotADoubtingThomas -
August 17, 2013
See more answers
Q:

why is there white dots on my washed clothes

A:

A Washer is definitely something we depend and when starts malfunctioning it can be a big inconvenience. I have attached some links below well you are waiting for an expert to reply , that give great information on way this may be happening. Hope it helps!

Read More
Priscilla V -
April 17, 2011
A:

Thank you for your question and I understand your concern.

I must assume the Clorox dots are appearing on colored garments after washing whites with bleach.

You washer has a timed bleach dispenser and the dispenser is not likely operating correctly and not releasing all the bleach in the previous cycle(s).

The tub ring assembly (key#8) with wax motor will likely need to be replaced. I added an image of the tub ring below. The tub ring is part #W10213410 and is available at Sears PartsDirect

I added a YouTube video showing how to remove the cabinet and drain pump. You will only need to remove the cabinet in order to access the tub ring. To remove the tub ring, release all the tabs from the tub ring by pulling the tab away from the tub. Remove the wires from the wax motor and lift and remove the tub ring. NOTE: Disconnect the power cord from the power source before servicing your washer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
April 19, 2011
See more answers

Top Parts