Model #11016882500 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Miscellaneous Parts, Optional Part
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Cleaning Lint trap on a Series 80 Kenmore washer 11016882500 Kenmore Residential washer

A:

Thank you for choosing sears I would be happy to help you with your washer. Upon researching model 11016882500; this model does not have a lint trap. I have posted a link below of a video on how to avoid lint on clothes into the washer.

I trust that this information will help you, thank you have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 16, 2014
Q:

looking to take apart kenmore dryer model #11016882500. I have to get in between the two drums. How do I disassemble the unit? Thanks

A:

Thank you for your question. The model number provided is for a direct drive washer. If you meant washer, then follow these instructions. Use a putty knife to release the clips under each end cap. Pull forward while lifting and flip the console back. Take a large flat blade screwdriver to remove the spring clamps, place the blade in the slot and pry up towards you, one on each side. Unplug the plastic 3 wire connector going down through the cabinet. Lift the lid and slide the cabinet off the frame of the washer. You should now be able to see all of the internal components of the washer.

If you reply back to this thread with the dryer number, I will be happy to assist. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
August 22, 2013
Q:

What is the capacity of my Kenmore Washing Machine

A:

Good morning..... I can appreciate your need for the capacity of your washer. By my estimate it is a 3.2 cubic foot unit. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information. I hope this is helpful and have a nice day.

Read More
Henry -
March 05, 2013
A:

Thanks for contacting ManageMyLife.com. Washer model 110.16882500 shows to be 3.2 cubic feet.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
March 05, 2013
A:

Knowing the size of your washer can be important. I see Henry provided you with some excellent information. I'm happy to help you. This washer is 3.2 cu. ft.

 

I hope this information helps you today. Thank you for using ManageMyLife.com

Read More
Korinna S -
Sears Technician
March 05, 2013
See more answers

Top Parts