Model #11016502690 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Brake And Drive Tube
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Automatic Washer 11016502690 Kenmore Automatic washer

A:

Thanks for the inquiry and for being a valued member.

I agree with your assumption; if the timer is not advancing, the timer assembly will need to be removed and replaced. This problem would likely be caused by a dead spot in the timer. A properly working timer should continue to advance through all the various cycles.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
November 19, 2014
Q:

tube leaks 11016502690 Kenmore Automatic washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

No hot water 11016502690 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your washer is not dispensing hot water. I did look into the model number you have provided and I have found information to assist you. I have found that it could be two parts causing the issue. It could be the mixing valve itself or the water temperature switch. You can test your valves by using a OHMs meter.  

The temperature selector switch lets you set the temperature of the water going into the washer. The temperature selector switch switch is usually a rotary switch mounted in the control panel. If the switch fails, the washer won't fill properly or might not fill at all. If one of the water inlet fill valves isn't actuated because of defective contacts in the switch, the actual water temperature differs from the set temperature.


The water inlet valve assembly is a set of electrically operated water valves that control the fill function in the washer. Replace the water valve assembly if the washer won't fill because a valve doesn't open or if the washer overfills because the valve doesn't close.

 

 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Let me know if this helps.

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
April 15, 2014

Top Parts