Model #107289850 CRAFTSMAN Lawn, Tractor

  • Frame-power Steering
    3 Results
  • Steering-tilt Steering
    3 Results
  • Engine-30hp B&s Twin
    3 Results
  • Transmission
    3 Results
  • Transmission-tuff Torq K71e
    3 Results
  • Controls
    3 Results
  • Controls-cruise Control
    3 Results
  • Electrical
    3 Results
  • Hood/grille/dash
    3 Results
  • Seat/seat Deck
    3 Results
  • Hydraulic Lift W/power Steering
    3 Results
  • Wheel/tire
    3 Results
  • Decals
    3 Results
  • 54" Deck-housing/arbor
    3 Results
  • 54" Deck-arbor Drive
    3 Results
  • 54" Deck-electric Height Adjust
    3 Results
  • Hardware Id/torque Specs
    3 Results
Find part by diagram >

Question and Answers

Q:

Front weights 107289850 Craftsman Tractor

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help you. Upon researching model 107289850 I was not able to find wheel weights for the front. I have seen weights but only for the back. One thing keep in mind the engine is on the front so that adds weight to the front also with the rider in the middle it adds more weight. The main thing is with steep slopes even without the bagger can be troublesome. I found the manual with the specific information for mowing on slopes. It's on the top of page seven. Take a look and make sure the mower will be able to mow the slope.

Click here for manual.

If you have any further questions please re-post.Thank you for choosing Sears have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 11, 2014
A:

David, I've never heard of front wheel weights. Generally, these front counterweights mount on the front bumper or on a bracket attached to the front of the frame. I've read the manual and I have already mowed the slope many times. My concern is that this bagger will add, when empty, well over a hundred pounds, most of it behind the rear wheels. Any grass in the bags would also apply the weight behind the rear wheels. The instructions with the bagger suggest a counterweight might be needed; I presume they assume the tractor will have an engine and rider. B&S made the tractor. B&S made the bagger for this tractor and for similar Simplicity brand tractor models. If Sears doesn't have the weights to allow me to use this bagger safely, can't someone at Sears find out from B&S what Simplicity part number I should be looking for? Thanks for the help.

Read More
Richard -
July 11, 2014
See more answers
Q:

I need information of 107.289850 tractor. I have a customer that wants to know if it has tuff torque drive train like the Simplicity Prestique?

A:

I can understand the importance of getting the proper information. To help you I have attached a link below to the owners manual for the tractor from manage my life.com. Hope this can assist you in the information you are needing.

Read More
Maira -
April 20, 2011
A:

Thank you for your question.

I can understand wanting to know if this is the same tractor as the Prestige by Simplicity.

They are made by the same manufacture.

The PGT 9500 is a two wheel drive with a lockable differential.

I will research this information and get back to you as soon as I here from my contact.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 21, 2011
A:

I have an update for you question. The PGT9500 Craftsman is built on the same platform as the Prestige. They upped the horsepower to 30 and it has a different mower deck, but it has the same transmission with the auto traction control and the locking differential feature. I hope this will answer your question. Thank you for using Manage My Life. Sam A.

Read More
Sam A -
Sears Technician
April 22, 2011
See more answers

Top Parts