Model #1069751784 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

refrigerator ice maker does not fill with water 1069751784

A:

I know that it can be very inconvenient for you not to have your ice maker working properly. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
October 09, 2012
A:

I know that it can be very difficult to have issues with your ice maker. The issue could be with the ice maker itself or the water valve. The images below will instruct you on how to test the ice maker and valve. If the module cycles properly in the test mode, it should fill the mold (tray) with water. If not, you could have a module failure or a wiring problem between the ice maker and the solenoid water valve. You can check the resistance of this circuit by unplugging the refrigerator and measuring the resistance between test points V and N. I hope this information helps with your repair. If you don't feel comfortable doing this yourself, just click on this link to schedule service: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
October 09, 2012
See more answers
Q:

what is the cubic feet on my kenmore model #106-9751784

A:

Is this an older compact refrigerator? If so, I found a link that is close with a similar model number. I provided a link below that you can view. If this is not correct, one of our expert technicians should get back to you within a day or two. . I hope the link will be helpful to you and have an nice afternoon.

Read More
Henry -
September 27, 2012
A:

Thank you for submitting your question. Due to the age of the refrigerator the measurement information is no longer available. In order to get the size of the unit, you'll have to measure it manually. This link will assist you in measuring. I hope this helps. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
September 28, 2012
See more answers
Q:

Is there any type of repair that can be made to a hole burnt through the freezer liner?

A:

You did not indicate the location of the burnt through liner. I must assume it was due to the light bulb staying on when the door was left open. It can be patched using white silicone sealant to fill the hole and then covering the hole with any type of white vinyl tape if needed to help hide the repair. The area must be clean and dry otherwise the vinyl tape will not stick. NOTE_: Make sure the light bulb is shutting off when the doors are closed.

Read More
Joey S -
Sears Technician
December 15, 2009

Top Parts