Model #1069750683 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Refrigerator
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is my ice maker over filling?

A:

I am sorry to hear about the issues you are having with your Kenmore refrigerator's ice maker. I did some research for you at the ManageMyLife website and found this expert response that may shed some light on the problem. I have attached the link below. I hope this helps. If you are thinking about scheduling service and have a qualified technician assist you, I have also attached the link to SearsHomeServices. I hope the links below will help you out.

Read More
James -
April 18, 2012
A:

Most of the time, the problem that you are describing is caused by a leaking water valve (part number 2315576). That valve is at the bottom of the refrigerator behind the bottom rear service panel. You can unplug the refrigerator and remove that panel to view the valve. If you want to fix this problem yourself, I recommend that you order a new valve from the Sears Parts Direct website.

  • Unplug the refrigerator and shut off the water supply.
  • Remove the water supply line on the back of the refrigerator. Have towels ready to catch residual water that will flow from the water system when you remove that line.
  • Remove the back panel.
  • Remove the wire harness plug from the valve.
  • Remove the water line from the valve.
  • Remove and replace the valve with the new one.
  • Connect the water line and reassemble the refrigerator.
  • Connect the water supply line and turn the water supply to the refrigerator back on. Check for leaks.
  • Plug the refrigerator back in and monitor the ice maker.

If you still have problems, then you may need to replace the ice maker assembly.

Read More
Tykara -
Sears Technician
April 19, 2012
A:

is there a sencor or something that would tell it when to stop running water i have replaced the valve and still hav e the problem

Read More
kevin -
August 18, 2012
A:

Kevin, all the signaling is done between the water valve itself and the actual ice maker. If after changing the water valve and you're still experiencing over filling, the issue may be the ice maker itself. I show that your ice maker has an adjustment on it for the fill (review image below). This is just a slight adjustment. If this adjustment does not correct the issue the ice maker will need to be replaced. In the second image below is ice maker testing information so that you can witness how the ice maker fills. After the adjustment and performing the ice maker test and it's still overfilling replace the ice maker. Again parts are available at www.searspartsdirect.com. Please let me know if you require further assistance with this repair. I hope this helps. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
August 20, 2012
See more answers
Q:

My Icemaker on a 1069750683 kenmore refrig. over flows into the bin before the while the tray is finishing its turn. Icemaker # 8650 I think.

A:

The Refrigerator is one of the most important appliances in the home and by far a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a question that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
July 25, 2011
A:

I can understand your concern about the water overflowing the icemaker. You have received some good information from Pvalde. Water will enter the icemaker toward the end of the cycle, before the ejector stops turning. If you have adjusted the water level and it still overfills, the water valve # 2315576 will most likely need to be replaced. It's available at SearsPartsDirect . If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
July 27, 2011
A:

Thanks Scott, makes good sense, hard water. Ordered new Icemaker includes valve. Appreciate your time and expertise. This is a fun site. Ron.

Read More
Rjhfd -
July 27, 2011
See more answers
Q:

Ice maker not getting enough water to make ice. Water connection not leaking. What do I need to fix problem?

A:

Now that summer is approaching its time to get this ice maker fix. While you are waiting on an expert to answer your question, I found some great links in the Manage My Life website. I have attached the link below. Hope this helps!

Read More
Dezeray S -
June 14, 2011
A:

I'm sorry you are having this problem with your icemaker. The information you have received from Dezeray is very good. First, make sure water is flowing to the icemaker, by jumping the test terminals L - V, as listed in the information you have received. Be very careful this is a hot (live) check. If water does flow ok and the problem is, the cubes are too small, the water level can be adjusted on this icemaker. I�m attaching a picture with instructions to adjust the water level.

If the water flow seems low when the jumper is placed in the test terminals, the water valve # 2315576 will need to be replaced. It�s available at SearsPartsDirect . I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
June 15, 2011
See more answers

Top Parts