Model #1069557680 KENMORE Side-by-Side Refrigerator

  • Exterior
    3 Results
  • Liner
    3 Results
  • Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser
    3 Results
  • Airflow
    3 Results
  • Wiring Harness
    3 Results
  • Unit Parts
    3 Results
  • Ice Maker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Valve was replaced on our Kenmore 106.9557680 ice maker over 24 hrs ago. No water in ice maker yet. what could be problem?

A:

Hey Robin, Since you need immediate you can visit SearsHomeServices.com or contact Sears Home Services Team at 1-800-424-2047 to set an appointment with a Sears Technician to go out to your home. I have provided the link below.

Read More
Salina L -
June 21, 2010
A:

Since the valve was replaced, the most likely problem will be with the icemaker. It can be checked using the test terminals on the module. Pull the cover off of the icemaker and you will see the terminals (see attached picture). Now place a well insulated jumper between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If it does flow now, the icemaker # 4317943 will need to be replaced. It's available at SearsPartsDirect . If water still won't flow, some voltage checks will need to be made. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If the tech that replaced the valve was a Sears tech and it was just a few days ago, there may not be a charge. You can call 1-800-469-4663 and someone there will be able to give you this type of information.

Read More
Scott D -
Sears Technician
June 23, 2010
See more answers

Top Parts