Model #1069542812 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

106.9542812 Refrigerator - Hole 106.9542812

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your fridge and I do understand your frustration. Glad to help out. I'm looking at your model number 1069542812 and this model did not originally come with an icemaker. The hole in the back of the cabinet is for the water line that goes to the icemaker. The tube connects to the fill spout that fills the icetray. The diagram will not have these parts listed being that it did not originally come equiped with it. You should a water valve at the bottom taking in the water from the supply line from the wall. From the valve you will have another going up to the icemaker. The kit part number is 4396418. I hope this information helps. 
 
 
 
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 
 
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
August 04, 2014
A:

Really? You want to sell me a new ice maker when what I am in asking is for a grommet that tills the hole in the back of the freezer? I have all these parts. What I don't know is what exact part fills the hole in the top right back of the freezer. The parts blowup shows nothing that would fill the hole. Wow. A new ice maker??? That's the best you can do?

Read More
Paul -
August 04, 2014
See more answers
Q:

Parts

A:

I completely understand your need for a parts list for your model. I did some research and provided a link to the parts list for your specific model. I hope this will give you a better idea on the next step to take until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
May 24, 2013
A:

I can understand how important it is to have the right parts for your ice maker. The fill cup for this model is part number 627791. It will cost about $9.48 plus tax and shipping. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 27, 2013
See more answers
Q:

need service manual for side by side fridge model # 106.9542812

A:

I'm sorry to hear that you are having some difficulties with your Kenmore Refrigerator. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. The expert who will assist you, can walk you through a repair like this or let you know if this may be something a technician should perform. He can also verify parts that may be required for you to order. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
James -
October 04, 2011
A:

Thank you for your question. Unfortunately, there is no service manual for this older unit. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 4318046 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. If you would like more assistance, reply to this thread and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
October 07, 2011
See more answers

Top Parts