Model #1069532582 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Unit
    3 Results
  • Air Flow Parts
    3 Results
  • Control
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Filter for refrigerator 1069532582 Kenmore Refrigerator

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you in checking if your Refigerator has a water filter. I did look into the model number you have provided and I do apologize I am not seeing a filter in this model. I recommend checking the common places where the filter is located. Click here for the reference.  If you do not see a filter in these areas listed then your unit was not equipped with a filter. You are able to add a by-pass filter on the back of the refrigerator as well. 

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .


Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 14, 2014
Q:

Replace light switch in refridgerator 1069532582 Kenmore Refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
June 23, 2013
A:

Thank you for contacting SearsPartsDirect.com with your question about replacing the light switch on your Kenmore Refrigerator. I am so sorry to hear the switch needs to be replaced. I can appreciate you desire to complete the repair without breaking parts on the refrigerator. I will be happy to help you with this. To better assist you, I have included the link for the parts diagrams for your refrigerator.

Parts Diagrams for Kenmore Refrigerator Model 1069532582.

Your refrigerator has three different types of light switches. There is a rocker light switch (key 25) on the Freezer Liner diagram. There is a light switch in the Control panel (key 4) on the Control diagram. And there is a light switch on the Dispenser (key 48) on the Dispenser Front diagram. Since your email doesn't indicate which switch you are replacing, I will address all three.

Before starting the repair, unplug the refrigerator.

It doesn't sound like you are working on the rocker switch because there would be no screws to remove. However, to make sure I answer you question, I will give you the instructions on removing this switch. The light switch will pop out but it can be kind of difficult. Sometimes it helps to insert a flat tip screwdriver under the edge. It's ok if the switch  breaks. Sometimes that is the only way to get the part out. The new switch will be much easier to push back in place.

If you are replacing the switch in the control panel, once you have the control box escutcheon (key 25) removed, you will not need to remove the rest of the control panel to replace the light switch. You can then pry the light switch out using a flat tip screwdriver. The two wires attached should have enough slack so that you can pull the switch out and disconnect it from the wires. Attach the wires onto the new light switch and push it back into the opening.

If you are replacing the dispenser light switch, then the dispenser cover will need to be removed. I have included a diagram with instructions on removing the cover. Once the cover is removed you will have access to the bracket holding the switch. You will need to remove the bracket before you can remove the switch.

I hope this answers your question. If I can be of further assistance, please respond to this thread. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
June 24, 2013
See more answers
Q:

My ice maker is no longer making ice. How do I fix it without replacing it?

A:

A technician would pry the plastic cover off the front of the icemaker. Leave the icemaker inside the freezer and connected. He would make a short jumper wire from some solid copper insulated number 12 or 14. Strip 3/8-1/2 inch of the insulation from each end of the wire.

On the front of the icemaker are some test holes marked by the letters H, L, M, N, T, and V. He would jump between T and H for 1 minute. This should cause the icemaker to go through a harvest cycle and fill with water. If it doesn't rotate the ice fingers through a cycle the icemaker has a bad thermostat, motor, or electronic module.

You can test the motor and thermostat with an ohm meter. The thermostat closes at 12-15 degrees and opens at 40 degrees. If they are good the module is bad.

If the icemaker goes through a harvest cycle and you hear a hum coming from the bottom of the refrigerator just at the end of the cycle, you have a problem with the water valve or water supply. You could also have a frozen inlet tube above the rear of the icemaker.

Read More
Jimmy K -
Sears Technician
May 13, 2008

Top Parts