Model #1069532511 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to remove trim of an Ice maker Dispenser

A:

When an appliance goes out I usually see money going out the window, either in repair cost, or replacement. Managemylife.com can take the mystery out of the repair. Your expert can help you determine how to repair this appliance. I did some research for you at this web site and found an expert answer to a similar question which may shed some light on the problem. I hope this will help you out. I also have a link to SearsPartsDirect.com to get those switches you need.

Read More
James -
November 27, 2012
A:

I can understand how important it is to have the right information for your refrigerator. To remove the dispenser cover on this model, insert a screwdriver under the bottom and pry it outward. When it releases, lift it upward to free the top tabs (see image). Be sure to disconnect the power first. With the cover off, you will have access to the switches. A good check for the switches will be to press the levers in slowly and listen for a clicking sound. If you cannot hear this sound it will indicate that either the switch has failed or the actuator is not making contact with it. To remove the bottom bin, lift the front and pull it forward. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 27, 2012
See more answers
Q:

I need to remove an Ice/water dispenser cover on a Kenmore fridge to replace a switch

A:

I understand that you need to remove your ice/water dispenser cover on your Kenmore refrigerator. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
November 24, 2012
A:

Hello, thanks but that dispenser when you remove the tray does not have any screws visible around anywere, at the bottom there is a couple slots where you can insert an screwdriver so I try to slide it in and then turn the flat screwdriver gently but nothing popped out, I'm afraid of breaking the cover if I try to pry open it harder

Read More
Carlos Perez -
November 24, 2012
A:

Thank you for your question. To remove the dispenser cover on this model, insert a screwdriver under the bottom and pry it outward. When it releases, lift it upward to free the top tabs (see image). Be sure to disconnect the power first. With the cover off, you will have access to the switches. A good check for the switches will be to press the levers in slowly and listen for a clicking sound. If you cannot hear this sound it will indicate that either the switch has failed or the actuator is not making contact with it. To remove the bottom bin, lift the front and pull it forward. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
November 27, 2012
See more answers

Top Parts