Model #1069532410 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Refrigerator model 106.9532410

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Yadira B -
October 28, 2012
A:

Thank you for your question. It's nice to know the size of your refrigerator. This is a 22 cubic foot model. Unfortunately, the dimensions for this older model are no longer listed. If you have a tape measure, you can measure the unit to get the dimensions. I'm listing the dimensions for a newer 22 cubic foot side by side that may be close to yours.

  • Depth w/ Handle (in.): 34.25
  • Depth w/Door Open 90 Degrees (In.): 50
  • Depth w/o Handle (in.): 31.75
  • Height to Top of Case (in.): 68.25
  • Height to Top of Hinge (in.): 69.37
  • Width w/ Door Closed (In.): 32.62
  • Width w/Door Open 90 Degrees (In.): 37.2

I hope this helps you.

Read More
Scott D -
Sears Technician
October 30, 2012
See more answers
Q:

How do I get the schematics for a Kenmore refrigerator, model number 106.9532410?

A:

The tech sheet for this model is no longer available. However, I was able to find one that is almost exactly like yours. You can also look behind the toe panel in the front of the refrigerator. The MFG usually hides the tech sheet behind the toe panel. Please see the images provided for a copy of the wiring diagram. If you need help with a specific repair, please get back with us with the updated information that you need help with.

Read More
biker dave -
Sears Technician
May 23, 2009

Top Parts