Model #10689589701 KENMORE Freestanding Icemaker

  • Cabinet Liner And Door Parts
    3 Results
  • Evaporator, Ice Cutter Grid And Water Parts
    3 Results
  • Pump Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Unit Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Ice Maker Won't Stop Making Ice

A:

I understand that your ice maker is making a lot of ice. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
March 02, 2013
A:

Thank you for your question. I can understand your concern about the over abundance of ice being produced. When this occurs, the bin thermistor will need to be replaced. I'm attaching some pictures with instructions to replace the thermistor # 2313633. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.   

Read More
Scott D -
Sears Technician
March 04, 2013
A:

Scott, ordered the part you suggested, received it and installed it. Piece of cake! The ice maker is working perfectly and my wife thinks I'm a hero!

Read More
CECong -
March 10, 2013
A:

CECong, I'm glad it's working properly again. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
March 11, 2013
See more answers
Q:

I have a Kenmore stand alone clear ice machine ice maker that I would like to trouble-shoot

A:

I think we all get a little frustrated when an appliance we depend on starts acting up on us. I'm sorry to hear that you are having some issues with this Kenmore ice maker. I did some research at Managemylife website and found an expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. If you are thinking about scheduling service and have a qualified technician assist you, I have also attached the link to SearsHomeServices. I hope the links below will help you out.

Read More
James -
September 21, 2012
A:

Did anyone respond to my question on the clear ice icemaker?

Read More
Mike -
September 21, 2012
A:

Hi,

Thank you for your question. It is concerning when your appliance is not functioning correctly.

From what you have described the unit flushes and stalls there. Looking for the bin thermistor is what it should be doing. Having replaced the control and no display I would reconnect the jumper from the control board to the display. If the connection is good and the jumper looks ok, no knick or separation you could simply have a faulty display and the display shows the error codes. Check the wires individually while disconnected from both of the boards and insure the jumper is not shorted out.

I think you have an error code showing but the display is faulty also.
I am sending some info I think you will be able to use in the troubleshooting process.

I hope this is helpful. If I may be of further assistance please include more details in a reply to this entry below.

Read More
Bill__W -
Sears Technician
September 21, 2012
See more answers
Q:

looking for parts to a Kenmore Elite stand alone ice maker...model number 10689589701 or I0689589701...web site did not recognize model number.

A:

When looking for a part on a refrigerator Manage My Life is here to help. While you are waiting for your expert answer, the model on your appliance did come up in the website searspartsidirect.com and I have attached it in the link below so that you can order some great parts. I hope my link is useful.

Read More
Joseph P. -
August 13, 2011
A:

The model number 10689589701 should bring up an image of the free standing ice maker. See the following link at the SearsPartsDirect web site. Check this link: Free Standing Ice Maker .

From the description you give I suspect the problem is a sealed system problem. You say the water is circulating as it should but you don't mention any ice forming on the evaporator plate.

If the compressor is running and water is circulated over the evaporator but no ice is formed the I suspect the sealed system has a freon leak.

Compressor and sealed system problems are not economical to repair.

Read More
Fred M -
Sears Technician
August 14, 2011
See more answers

Top Parts