Model #10689583703 KENMORE Freestanding Icemaker

  • Cabinet Liner And Door Parts
    3 Results
  • Evaporator, Ice Cutter Grid And Water Parts
    3 Results
  • Pump Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Unit Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

kenmore ice machine 10689583703 continuous pump running 10689583703

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the ice machine.
 
Glad to help out.   Im  looking at your Kenmore Ice Machine model number 10689583703.

There are several possibilities for what could be wrong with the icemaker. Some possible causes are:

The water valve not filling the reservoir.

The cutting grid not cutting the ice properly.

The control board starting the harvest cycle at wrong time.

The water pump not working properly.

These machines require knowledge and experience to repair. I suggest you go to

services.sears.com/shs/category/repair?sid=MMLxexpertxmerch

and get a Sears technician to diagnose and repair the problem.

 You may have a problem with that electronic control board in the control. Unlug the ice maker to completely disconnect electrical power for 5 minutes. If the ice maker is hard wired to a junction box, then you can shut off the house circuit breaker for that ice maker for 5 minutes. This may reset the control board. Restore power and see if the ice maker works normally. If not, then you can use the diagnostic test shown in the image below to check the functions and the components. If you find no problems with any of the components and the control still goes into a clean cycle after making one batch of ice, then you will probably need to replace the electronic control board on that ice maker.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 30, 2014
Q:

Diagnostic mode for icemaker model 10689583703 10689583703

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Kenmore 10689583703 ice maker making ice when the ice maker is full.

A:

I know that it can be very difficult to have issues with your ice maker. The images below will provide the testing information you need, as well as the diagnostics test for this model. The test that you preformed on the on the thermistors does indicate that they are working normally. It is most likely the thermostat is the issue. The last image below shows that both the bin thermostat and bin thermistor are located in the control panel parts. The thermostat is #12 and the thermistor is #20. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
November 26, 2013
A:

Thanks Anne. You noted "images below will provide the testing info you need, as well as the diagnostics test for this model." I did not see images in your reply. Thanks

Read More
Ricky -
December 01, 2013
A:

Thanks Anne. You noted "images below will provide the testing info you need, as well as the diagnostics test for this model." I did not see images in your reply. Thanks

Read More
Ricky -
December 01, 2013
A:

I have added links to the images below. Please let me know if you are still having issues with them. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
December 01, 2013
A:

Hi AnneJ, It's Ricky again. I am having another problem with my ice maker. Could you please repost the links above so I can troubleshoot the faulty part. I need the link that provides the error codes. Thank you!

Read More
Ricky -
March 06, 2014
See more answers

Top Parts