Model #10689583701 KENMORE Freestanding Icemaker

  • Cabinet Liner And Door Parts
    3 Results
  • Evaporator, Ice Cutter Grid And Water Parts
    3 Results
  • Pump Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Unit Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

MY Kenmore Elite stand alone ice maker makes ice filling the ice bin, then quits and won't make anymore ice. 10689583701 Kenmore Ice maker free standing

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your icemaker is not making ice.

 
DIAGNOSTIC MODE

1.Donotcontinuewiththediagnosisoftheice
makerifafuseisblown,acircuitbreaker
istripped,orifthereislessthana120volt powersupplyatthewalloutlet.
2.  Allunitsthathavefailedduringthefirstfew daysofuseshouldbecheckedforloose
connectionsormiswiring.
Entering and Navigating — Manual 
Diagnostics
• Turntheproducton.Within10secondsofPowerOn,pressandholdtheOnandthe
Cleanbuttons.ReleasebothbuttonswhenalluserinterfaceLEDsbegintoflash.
• Within5secondsofallLEDsflashing,push anyotherbuttonontheuserinterface.This beginsmanualdiagnostics.
• Ifnobuttonispressedwithin5seconds,the productgoesintotheautomaticdiagnostic
modeusedattheassemblyplant. Each
componentiscycledfor5seconds.
• TheServicebutton(orOffbuttononsome
models)isusedtoadvancethrougheach
step.
• Toexitmanualdiagnostics,pressthePower
button(orOnbuttononsomemodels).

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 29, 2015
A:
Natasha12 -
Sears Technician
July 29, 2015
See more answers
Q:

Kenmore Free Standing Ice Maker Display resets constantly 10689583701 Kenmore Ice maker free standing

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your icemaker is not working properly.

 
DIAGNOSTIC MODE

1. Do not continue with the diagnosis of the ice 
maker if a fuse is blown, a circuit breaker 
is tripped, or if there is less than a 120 volt 
power supply at the wall outlet.
2. All units that have failed during the ? rst few 
days of use should be checked for loose 
connections or miswiring.
Entering and Navigating — Manual 
Diagnostics
• Turn the product on. Within 10 seconds of 
Power On, press and hold the On and the 
Clean button. Release both buttons when 
all user interface LEDs begin to ? ash. 
• Within 5 seconds of all LEDs ? ashing, push 
Max Ice (Fast Ice) button on the user
interface. This begins manual diagnostics.
• If no button is pressed within 5 seconds, the 
product goes into the automatic diagnostic 
mode used at the assembly plant. Each 
component is cycled for 5 seconds.
• The Max Ice (or Acceler Ice button on some 
models) is used to advance through each 
step.
• To exit manual diagnostics, press the ON/OFF
button.

I have attached the voltage chart to test the control board to the transformer and the control board itself. You will need a multi meter. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 18, 2015
A:
Natasha12 -
Sears Technician
June 18, 2015
See more answers
Q:

cycling too much. 10689583701 Kenmore Ice maker free standing

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your icemaker is not working properly.

 I have attached the instructions to run the diagnostics mode on your unit. 

Entering and Navigating — Manual 
Diagnostics
• Turn the product on. Within 10 seconds of 
Power On, press and hold the On and the 
Clean button. Release both buttons when 
all user interface LEDs begin to ? ash. 
• Within 5 seconds of all LEDs ? ashing, push 
Max Ice (Fast Ice) button on the user
interface. This begins manual diagnostics.
• If no button is pressed within 5 seconds, the 
product goes into the automatic diagnostic 
mode used at the assembly plant. Each 
component is cycled for 5 seconds.
• The Max Ice (or Acceler Ice button on some 
models) is used to advance through each 
step.
• To exit manual diagnostics, press the ON/OFF
button.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 16, 2015
A:

Thank you for the information. I will read the diagnostic codes per your instructions. Can you provide me with a diagnostic code chart, I cannot read the attachment. Thank You.

Read More
Mike -
June 16, 2015
A:

My unit is doing the same thing, but now the display is dead, (no led lights working). Following

Read More
josh -
June 17, 2015
See more answers

Top Parts