Model #10689582701 KENMORE Freestanding Icemaker

  • Cabinet Liner And Door Parts
    3 Results
  • Evaporator, Ice Cutter Grid And Water Parts
    3 Results
  • Pump Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Unit Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

No water to ice maker FFHS2611PF9

A:

Thank you for your inquiry on your Frigidaire Refrigerator, Model: 106.89582701. I am so sorry to hear that you’re having trouble with your refrigerator. From reviewing the details on this model, a good check for this, to help determine the problem will be, to remove the icemaker and disconnect the wire harness. Now place a glass under the fill tube and using a well-insulated jumper, insert it in the harness, inside the freezer between the black and yellow wires. Be careful this is a hot (live) check. If water now flows into the glass, it indicates, the icemaker switch has failed or the icemaker is not cycling. If nothing happens but you can hear a humming noise, the water valve will need to be replaced. Another check will be to cycle the icemaker. If the icemaker cycles and does fill, it will indicate that it's not cycling on its own. This could be due to the icemaker thermostat or the temperature in the freezer is not cold enough. If the temperature gets up to 10 degrees, the icemaker may not work. To check the temperature, place a thermometer between some packages. Air temperature is not a good check.

Safety Warning: Before beginning this repair, disconnect the power supply to the refrigerator to prevent risk of injury from electrical shock.

Caution: internal parts may have sharp edges that may cause serious cuts. Use caution and wear protective gloves if possible.

If you don’t feel comfortable/confident doing the repair yourself, you can have a Sears’s repair technician come to your home and repair it. Here is the link for the technician’s website: SearsHomeSerivce.

 

I hope this answered your question. Thank your for contacting SearsPartsDirect.com, we appreciate your business. Have a great day.  

Read More
Gerry 93 -
Sears Technician
June 11, 2015
Q:

Kenmore Coldspot Freestanding Ice Maker only making thin ice. 10689582701 Kenmore Ice maker free standing

A:

Thank you for your inquiry on your Kenmore Refrigerator, Model: 106.89582701. I am so sorry to hear that you’re having trouble with your refrigerator. From reviewing the details on this model, this problem is referred to as "hollow cubes" and it does cause the cubes in the ice bucket to stick together. If the refrigerator and the icemaker are level hollow cubes are caused by 1 of 2 things. The water fills into the end of the icemaker opposite the motor and controls. If the water doesn't fill all of the ice molds the one closest to the motor will have a partial fill. The thermostat senses the temperature of this mold and when the thermostat closes the harvest cycle begins. A partial fill causes this mold to cool faster than the other molds so the icemaker harvests partially frozen cubes from the other molds. To check this put your finger into the molds and see if the front one is less full than the others. I am sending you an image showing how to adjust the water level of the icemaker. If the water level changes again after you have adjusted it, replace the refrigerator water valve. The second thing that can cause hollow cubes is a defective thermostat inside the icemaker. If this thermostat fails it is slightly more expensive and much less work to replace the entire icemaker. If the water level in the ice molds is all the same I would replace the icemaker.

Safety Warning: Before beginning this repair, disconnect the power supply to the refrigerator to prevent risk of injury from electrical shock.

Caution: internal parts may have sharp edges that may cause serious cuts. Use caution and wear protective gloves if possible.

If you don’t feel comfortable/confident doing the repair yourself, you can have a Sears’s repair technician come to your home and repair it. Here is the link for the technician’s website: SearsHomeSerivce.

 

I hope this answered your question. Thank your for contacting SearsPartsDirect.com, we appreciate your business. Have a great day.  

Read More
Gerry 93 -
Sears Technician
June 11, 2015
Q:

What is the purpose of the Kenmore ice machine relay and overload kit? 10689582701 Kenmore Ice maker free standing

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your icemaker. Upon researching model 10689582701; the relay and overload kit basically starts the compressor. The problem that you are experiencing sounds like the control board may be at fault. The control board governs the functions of the unit so when it fails it can become unresponsive. I have posted a link of the control board#5 on diagram linked to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 18, 2015

Top Parts