Model #10689483993 KENMORE Freestanding Icemaker

  • Cabinet Liner And Door
    3 Results
  • Evaportator/ice Cutter Grid/water
    3 Results
  • Pump
    3 Results
  • Control Panel
    3 Results
  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

I HAVE A KENMORE COLDSPOT MODEL NUMBER 106.89483993 SERIAL EMI415388

A:

I'm sorry to hear that you are having some difficulties with your refrigerator. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Joseph P. -
November 09, 2011
A:

The ice thickness thermistor slides under a tab on the bottom of the evaporator plate. I can not find an image showing this tab. The tab is welded to the bottom of the evaporator plate and holds the thermistor against the evaporator plate so it senses the temperature of the plate.

The ice bin thermistor mounts in a plastic like a wire tie on the right hand side of the bin.

Read More
Jimmy K -
Sears Technician
November 11, 2011
See more answers
Q:

Why won't the ice being made drop to the cutter?

A:

Ice not dropping off the evaporator plate can be caused by 4 main reasons:

  1. The board
  2. The thermistor (sensor)
  3. The hot gas solenoid could be sticking
  4. The evaporator plate may need to be cleaned
Ice machine cleaner # 8171307 is available at Sears Partsdirect . A technician will be required to make these checks, if the cleaner does not work.

Read More
Scott D -
Sears Technician
May 12, 2009

Top Parts