Model #10678219801 KENMORE Top-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Shelf Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Water Dispenser Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

how do i change a cabinet roller on refrigerator

A:

I understand that you want to change the cabinet roller on your refrigerator, which can be difficult at times to change. I was doing some research on your question here on the Manage My Life website and was able to locate some information for you to view. I attached the link below for you to view while you wait on your response from an expert. I hope the link that I provided is helpful. Have a great day!

Read More
Alina F. -
May 31, 2012
A:

Thank you for using ManageMyLife .

The roller can be changed by first raising and blocking the refrigerator up, so that it is tipped back. I would advise you to use a 2x4 piece of wood long enough to go from one side of the refrigerator to the other side. Then remove the bottom bolt holding the old roller to the frame of the refrigerator. Install the new one I the reverse order and remove the wood block. Check the level of the refrigerator from front to rear and then from side to side, and the closure of both doors and that�s it you should be finished.

If you need the part here is the link: Sears PartsDirect .

I hope this is helpful. If I may be of further assistance please include more details in a reply to this thread.

Read More
Bill__W -
Sears Technician
June 01, 2012
A:

Thank you Bill, this will be very helpful when the roller arrives. Ed

Read More
Ed -
June 01, 2012
A:

If you have any other questions please use Manage-My-Life and we will help you fine the best solution.

Read More
Bill__W -
Sears Technician
June 01, 2012
See more answers

Top Parts