Model #10674264400 KENMORE Top-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Shelf Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Water Dispenser Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

water leak 10674264400 Kenmore Refrigerator

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model 10674264400; it sounds like the freezer drain may have frozen. The freezer drain allows the melted ice form the defrost cycle to drain into the drain pan on the bottom of this unit, so when the drain freezes it becomes clogged and the water accumulates in the freezer floor causing the ice to melt once it goes thru the defrost cycle. This is usually what causes the melted ice water to leak on the kitchen floor. To fix the problem described you will need to unplug the refrigerator power cord, remove the food from your freezer and also remove the rear panel in the freezer. With the panel removed you will have access to the drain, you can pour hot water down the drain in the freezer using a turkey baster until the water goes down the drain line melting the ice that is causing the blockage. Once the drain is cleared you can reassemble the rear panel and plug the refrigerator power cord back in.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 16, 2015
Q:

The freezer for my Kenmore Coldspot refrigerator works but the fridge is warm. I cleared ice from inside the fan housing down. How can I tell if fan works now?

A:

I understand that your freezer is working fine but your refrigerator is warm. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
July 05, 2012
A:

The fan in the freezer is located behind the air tower and I expect you can feel the air and hear the fan if it is working. If there is a freezer door switch be sure to hold it in so the fan thinks the door is closed. The fan usually shuts down if the door is open. You indicate there was ice but from the description you give I don't suspect there is a defrost problem. If there is a defrost problem the entire evaporator is usually covered in ice. I hope this helps. You can reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
July 07, 2012
A:

Thanks you. After reading dozens of questions and researching I'm pretty sure the evaporator fan motor has died. Seems like a chronic problem. I found one quickly on ebay, new and shipped for under $24. In the meantime I put a mini battery operated personal fan in there to try and see if that would hold us over. It doesn't seem to have the same effect, but hopefully I won't have to toss hundreds of dollars worth of food away. Much appreciated.

Read More
KURT -
July 07, 2012
A:

I expect the refrigerator section will suffer more than the freezer. The battery operated fan was a good thought but it wouldn't be in a position to circulate air though the coils.

Read More
Fred M -
Sears Technician
July 09, 2012
See more answers
Q:

Is there a reset button on the Kenmore coldspot top mount refrigerator model #106.74264400?

A:

I understand that you want to reset your Kenmore refrigerator. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
September 02, 2011
A:

unfortunately there is no reset button on the refrigerator the only way to reset most electronic controlled units is, to unplug the power cord for about a minute or so and then reconnect it. This resets the board. If the compressor begins to run and stops right away the compressor (PART NUMBER: 2221795)will need to be replaced you will need to get a service technician to repair this for you.

Read More
Jerome G. - Personal Solutions Manager -
Sears Technician
September 02, 2011
See more answers

Top Parts