Model #10674242402 KENMORE Top-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Shelf Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Measurement Dimensions 10674242402 Kenmore Top mount

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model 10674242402; this model is 22 cu.ft, Length:2F11.0, Width:2F10.8, 5F8.0, Weight:250lbs.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 29, 2015
Q:

How to access & clean the drain tube on a Kenmore refrigerator?

A:

The model number you submitted is an incomplete and invalid model number. Without a valid model number I will only be able to provide general information.

First, disconnect the power cord from the power source. The rear panel inside the freezer will need to taken off in order to access the defrost drain trough and opening. You may have to remove the air tower first which would be covering the fan motor. On some models the floor of the freezer must be removed in order to access the drain hole in the drain trough. NOTE: Be careful once you remove the rear panel, the aluminum fins are razor sharp.

I recommend calling a service technician to diagnose and repair your refrigerator or resubmit your question for model specific instructions.

Read More
Joey S -
Sears Technician
July 04, 2009
A:

Thanks to MMH Expert_JS. I am still Bob102; trying to reply to your reply. This website is not easy to use and I may be missing something. The correct refrigerator model # is 79202990. Will I need to remove the icemaker; and any precautions about that? We did just pay a bunch to get our washer fixed; trying to avoid that on a 10 year old fridge. Your info so far seems helpful; and gotta get this done within a couple of days so may need to run with what you've already given me.

Read More
Bob102 -
July 05, 2009
A:

Kenmore Model 10674242402 Kenmore Top mount refridgerator clearing drain tube.

Read More
John -
July 13, 2013
A:

How do I get at the drain tube

Read More
John -
July 13, 2013
A:

Thank you for choosing ManageMyLife.com. I have included an image below on how to remove your freezer floor to access the drain. Unplug the refrigerator and remove the back panel on the freezer. Once removed, you will see the condenser coils. The drain is under the coils but you may have to defrost or remove any ice build up before being able to get to the drain.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
I hope this information is useful. If you have further questions please let me know. Thanks for using ManageMyLife.com.

Read More
Lokelani -
Sears Technician
August 28, 2013
See more answers
Q:

ice contaminant

A:

The plastic chips from the ice cubes from the ice maker can be very concerning. I found some information for you that I am really hoping will help you until your expert can answer your question. I am adding the link below to help you with your question while you wait for your expert response. I do hope that this will help you.

Read More
Marc -
July 27, 2012
A:

Particles in the ice or water from any source can be distasteful. The most likely cause is calcium.

Calcium is present in all water supplies. It is not harmful and will not cause any problems. The reason you notice it in the ice cubes is because it is suspended in the ice and released slowly as the ice melts.

The only way to remove calcium is with a water softener. A filter can improve the taste of water but it will not remove the calcium.

The only other possibility is that the ice maker mold may be flaking. If this is the case, the icemaker may have to be replaced. A technician here; Sears Home Services

If any further assistance is needed, please respond to this thread. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
July 28, 2012
See more answers

Top Parts