Model #10674234402 KENMORE Top-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Shelf Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Ice tastes bad. 10674234402 Kenmore Top mount

A:

I know how important it is to have good tasting water coming from the water dispenser so that you can enjoy the water. I am sorry for the inconvenience and I did manage to find a link with a similar question. I am also adding a second link in where you can find information about maintenance on your refrigerator such as changing the water filter if applicable to your model. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
December 18, 2012
A:

I know that it can be very frustrating to have issues with your ice tasting funny. There are a few reasons for the ice to do this. The air inside the refrigerator will pick up any and all odors. It then returns to the freezer and blows directly over the ice and absorbs the odor. The end result is ice that tastes like garlic or some other unpleasant odor.

I would recommend emptying the ice maker bin to start over. You can clean the ice maker to remove residual deposits of salts or ice crystals that contain the smell. A paste of lemon and baking soda will help to clean and restore a fresh smell. A second method is to soak the ice maker parts in white vinegar. The white vinegar will normally dissolve salt deposits from hard water. Cleaning that ice mold may fix your problem.

The ice bin should be emptied and cleaned at least once or twice a month. The refrigerator will also need to be cleaned. Remove everything in the refrigerator and clean it with a mild detergent and warm water. Be sure all packages and containers are sealed. A box of baking soda opened and sitting on a refrigerator shelf can help absorb odors in the future. The water will absorb the plastic odor from the fill tube, which will go away with use. If the supply water line to the refrigerator is plastic, it needs to be changed to copper. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
December 19, 2012
See more answers
Q:

What size is a 106.74234402 refrigerator and is it in the elite series.

A:

I know how important it is to have detailed information about an appliance before making the big purchase. I did some research and I was able to find the owners manual for the refrigerator. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
May 03, 2012
A:

Thank you for your question. It's nice to know the size of your refrigerator. This is a 22 cubic foot top mount unit. If it's an elite model, it will have elite listed on the Kenmore plate or on the model and serial tag. I hope this will help you.

Read More
Scott D -
Sears Technician
May 05, 2012
See more answers
Q:

Water dripping from the freezer into the fridge on Kenmore 106.74234402.

A:

Leaking water can be an irritating problem. Especially if it is ruining your food. I researched your question and found two helpful expert answers for this type of problem. I have provided the link below. I hope this helps! http://www.managemylife.com/mmh/questions/140352-why-is-my-freezer-leaking-water-into-the-refrigerator http://www.managemylife.com/mmh/questions/219090-water-leaking-fridge-freezer-1

Read More
Jacqueline S -
October 28, 2010
A:

Water dripping is most likely because the defrost drain system is blocked or clogged with ice.

When the defrost heater cycles on the frost in the freezer melts. There is a drain pan beneath the freezer coils that catches the water and directs it out a drain down the back of the unit into a drain pan near the compressor.

To fix this problem I suggest you remove all the frozen food in the freezer and place in the refrigeration section. This will act as your ice chest.

Turn off the unit and open the freezer door to let the ice thaw. You can remove the rear panel of the freezer to access the coils and drain pan.

You can use a hair dryer to speed things up.

Once all the ice melts the water should drain into the drain pan near the compressor where it will evaporate.

One other thing to check is the refrigerator should be tilted front to back just a little bit.

I hope this information is helpful to you. You can always reply to me with any additional information for further assistance.

Read More
Fred M -
Sears Technician
October 30, 2010
A:

I have cleared drain tube twice but still having probem. It works well for a month then starts leaking again.

Read More
stvdwrds 1098 -
December 12, 2010
A:

I should have stated earlier. My Fridge is a Kenmore Model # 106.74254400.

Read More
stvdwrds 1098 -
December 12, 2010
A:

I'm not sure how far down the drain system your cleaning out. In the back of the refrigerator is drain tube. If the drain is completely cleaned out then there should be water dripping out of the part key 24 drain tube. After you clean the drain out pour a little hot water into the drain and see if it comes out the drain. You don�t mention any ice built up which would indicate a defrost heater problem. Sometimes adjusting the refrigerator so there is a slight tilt to the back will help the water drain faster. Make sure the drain line is clear through the back of the refrigerator.

Read More
Fred M -
Sears Technician
December 15, 2010
See more answers

Top Parts