Model #10673182302 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Cubic Feet of a Kenmore 10673182302 10673182302 Kenmore Refrigerator - top mount

Q:

Kenmore refrigerator model # 10673182302 10673182302 Kenmore Refrigerator - top mount

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore refrigerator.

I can understand the frustration of your refrigerator not functioning properly, after researching model number 106.73182302. This model is 21 cubic feet.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
July 31, 2015
A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore refrigerator.

I can understand the frustration of your refrigerator not functioning properly, after researching model number 106.73182302. This model is 21 cubic feet.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
July 31, 2015
A:

What size is the freezer section?

Read More
Melissa -
July 31, 2015
See more answers
Q:

Door alignment 10673182302 Kenmore Refrigerator - top mount

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to align your refrigerator doors. 

Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below:
1. Plug into a grounded 3 prong outlet. 
2. Move the refrigerator into its final position. 
3. Remove the base grille (see Base Grille graphic). The two 
leveling screws are part of the front roller assemblies which 
are at the base of the refrigerator on either side.
4. Use a screwdriver to adjust the leveling screws. Turn the 
leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator. 
NOTE: Having someone push against the top of the 
refrigerator takes some weight off the leveling screws and 
rollers. This makes it easier to adjust the screws.
5. Open both doors again and check to make sure that they 
close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.
6. Replace the base grille

Door Alignment
If the space between your doors looks uneven, you can adjust it using the instructions below:
1. Pry off the top hinge cover.
2. Loosen the top hinge screws using a ?⁄?? in. socket or wrench.
3. Have someone hold the door in place or put a spacer 
between the doors while you tighten the top hinge screws.
4. Replace the top hinge cover

You will need to open the freezer door to get access to the hinge for the bottom door and follow the door alignment procedure. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
October 30, 2014

Top Parts