Model #10672992201 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kemmore Elite Refrigerator 106-729-92201

A:

Thank you for contacting SearsPartsDirect.com with your question about the cubic feet of Kenmore Elite refrigerator 106-729-92201. I will be happy to help you with this.

This refrigerator is 18.8 cubic feet. There are 13.87 cubic feet in the fresh food section and 4.92 cubic feet in the freezer section. 

I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
March 03, 2014
Q:

Kemmore Elite Refrigerator 106-729-92201

A:

Thank you for contacting SearsPartsDirect.com with your question about the cubic feet of Kenmore Elite refrigerator 106-729-92201. I will be happy to help you with this.

This refrigerator is 18.8 cubic feet. There are 13.87 cubic feet in the fresh food section and 4.92 cubic feet in the freezer section. 

I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
March 03, 2014
Q:

Food section of fridge is not cold

A:

I found a question in Manage My Life that was similar to the one you asked. This question should give you a good answer while your waiting on your expert response. The link will give you some useful information on why your freezer is cooling and your refrigerator isn't. I'm attaching the link below, I hope this helps!!!!!! http://www.managemylife.com/mmh/questions/147117-why-is-the-freezer-too-cold-and-the-refrigerator-is-not-cold-at-all-what-can-i-do-about-that

Read More
Raquel F -
November 01, 2010
A:

When the refrigerator stops cooling it can be very frustrating. By turning the thermostat off and then back on, can cause the lights to dim. This is normal because the compressor will not be able to, restart so soon. The compressor is the only component in this refrigerator that will pull enough current, to dim the lights. Now, if the freezer is working good but not the fridge section, it does indicate an air flow problem. If the evaporator motor is not running but the compressor is, the motor # W10189703 will need to be replaced. As long as the compressor is running, the evaporator motor should also run. To replace this motor, everything in the freezer will have to be taken out, so the back panel can be removed. I�m sending you some pictures with instructions to remove the cover and replace the motor.

If the motor is still running check for a heavy frost build up on the back panel, which will indicate a defrost problem. As the frost gets thicker, the air flow to the fridge section will be reduced. In this case I recommend turning the unit off for several hours to allow it time to thaw. The unit will cool good again for several days until the frost builds back up. This type of problem would be due to a defective timer, an open element or bi-metal. A meter will be required to check the element and bi-metal. I hope this will help you. If you would like more assistance, additional details will be helpful.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
November 02, 2010
A:

Thanks to both raquel and scott. I tried raqel's link and followed through with defrosting before I moved ahead with my suspicion that the evaporator motor had died. Scott's advice only confirmed my next step. I bought the replacement motor and had the fridge disassembled and put back together in less than an hour. Scott's diagram did not come through, so here is the image link for an exploded view that I found very helpful on Sears Parts Direct: http://www.searspartsdirect.com/partsdirect/partsdirect/showSubComp.pd?imageUrl=http%3a%2f%2fc.searspartsdirect.com%2flis_png%2fPLDM%2fP0207016-00002.png Here's one other suggestion. You will need a 1/4" socket to remove the screws that hold the icemaker and fan assembly together. If you have magnetic socket tips, you will avoid the risk of losing a screw down any of the vent holes.

Read More
2w3e4r -
November 03, 2010
See more answers

Top Parts