Model #10672292201 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Freezer Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

fridge cools but won't kick back on 10672292201 Kenmore Refrigerator

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your refrigerator is not working properly.

I recommend going throught the defrost diagnostics to see if you need to replace the electronic control board. 

If that does not work, then you may need a service techcnician to diagnose the unit. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
January 22, 2015
Q:

refrigerator section stays around 47 degrees F 10672292201 Kenmore Refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

ICE MAKE MALFUNCTION where do i start to resolve.

A:

I'm sorry to hear that you are having some difficulties with your ice maker, I know how much better refreshments can be when they are ice cold. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links provided assist you.

Read More
Joseph P. -
November 16, 2011
A:

If you don�t have any water or ice in the mold of the icemaker try these instructions. If the icemaker is full of ice and not dumping any, replace the icemaker.

Remove the ice bin from the freezer and look good at the icemaker fill tube above and behind your icemaker. If it is frozen up the water can�t reach the icemaker. You can defrost the fill tube with a hair dryer.

If the fill tube is not frozen shut, you need to test the water valve. Make a jumper wire from insulated wire and strip 1/2 inch insulation on each end. Disconnect the power to the refrigerator, remove the front cover of the icemaker and insert the jumper wire in terminals L and V on the front of the icemaker body. Connect power to the refrigerator and listen for the water valve to hum and water should run into the icemaker. If no water runs into the icemaker, replace the water valve.

Read More
Jimmy K -
Sears Technician
November 18, 2011
See more answers

Top Parts