Model #10671294100 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Freezer Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How many cubic feet are in my Kenmore 106.71294100 refrigerator? 10671294100 Kenmore Top mount refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
July 08, 2013
A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to know the size of your refrigerator especially when it comes time to replace it. I was unable to find any specifications for this particular model. However, I have included below, instructions on how to measure the cubic feet capacity of your model. I hope this will help.

1. Take everything out of your refrigerator. You do not want to have to work around storage containers and shelving.

2. Measure the width from right to left, making sure that you keep the tape level. Write the number down.

3. Measure the height, using one of the front edges so that you keep the tape plumb. Write the number down.

4. Measure the depth from a top inside corner to the front edge. Write the number down.

5. Multiply the three dimensions. If, for example, the height is 45 inches, the width is 31 inches, and the depth is 17 inches, you multiply 45 x 31 x 17, for a total of 23,715 cubic inches.

6. Divide the total by 1,728 -- the number of cubic inches in a cubic foot -- to determine the volume of your fridge in cubic feet, which is how most manufacturers represent the volume of their refrigerators. Here, 23,715 cubic inches equals 13.72 cubic feet.

If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Desirea -
Sears Technician
July 09, 2013
A:

Thank you. Made the calculation and have begun the process of searching for a replacement.

Read More
Michelle -
July 09, 2013
A:

~22 cu ft.

Read More
Robert -
November 19, 2013
A:

What is the Square footage of my Sear Refrigerator model 795.75554401

Read More
Stan -
June 24, 2015
See more answers
Q:

What is the capacity of this model? 10671294100 Kenmore Top mount refrigerator

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I have found that your unit is 22 cubic feet,. 
 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 28, 2015
Q:

How can I fix a drainage problem on my Kenmore Elite refrigerator model 106.71294100?

A:

The parts list diagram of the evaporator section of your refrigerator is shown in the first image below. Unplug the refrigerator and follow these basic steps to remove the inside back wall of the freezer:

  1. Unplug the refrigerator.
  2. Remove the shelf and all items from the freezer.
  3. Remove the ice maker. There should be 3 screws, two on top and one on the bottom that need to be removed from the side wall. Unplug the wiring harness and pull the ice maker module out.
  4. Remove the bottom floor of the freezer.
  5. Remove the air tower on the inside back wall of the freezer.
  6. Remove any screws securing the inside back wall of the freezer to the cabinet.
You should be able to pull the inside back panel of the freezer out using this basic procedure. The parts list diagram below may help you with this process.

Once the inside back freezer panel is removed, you can access the drip tray below the evaporator. Thaw any ice found in this pan. Pour some hot water down the drain tube to make sure that it is draining properly.

If you see ice build-up on the left side apparently caused by water splashing out of the fill tube for the ice maker, you may need to install an extension tube cover (part 2203024) as shown in the second image below. You can order this part from the Sears PartsDirect website if needed.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
August 24, 2009

Top Parts