Model #10670842102 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Liner
    3 Results
  • Unit
    3 Results
  • Refrigerator Door
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Cubic Feet of 106.70842102 Refrigerator

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how you would need the cubic feet of your Refrigerator. I did do research and I am showing your model number is 18 cubic feet. I have also found the complete product dimensions as well. The length is 2F10.8, the width is 2F8.5, and the height is 5F8.3. If you have any other question please feel free to respond.

 

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
August 12, 2013
Q:

How do I install new water valve for my refrigerator?

A:

when it comes to installing a new part to an appliance can be tricky. I have done some research on the Manage My Life website and have located a link that you may find helpful towards you issue. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
June 07, 2012
A:

Thank you for submitting your question. Most of the new valves now have the push in type connections. The image provided below will instruct you on how to install the water lines into the new water valve. The tubes will just push into the new water valve. You should be able to cut the tubes behind the metal inserts to use the push-in style valve. I hope this helps. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
June 09, 2012
See more answers
Q:

Wiring Diagram?

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. This will also be a great place to find your wiring diagram. I have attached an expert answer to a similar question which you may find helpful. The link is attached below. Your expert will respond to your specific question shortly.

Read More
James -
June 28, 2011
A:

Thank you for your question. The information you have received from James is good for locating a manual. I'm attaching the wiring diagram for this model in the first picture. The second picture is some strip circuits. I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
June 29, 2011
A:

Thanks Scott PROBLEM IS FIXED! The problem was the solid state compressor start relay, detail "D" on the second page. After getting the relay, one day wait and $32.99 plus tax later, it took about 5 minutes to install and turn on and another 2 minutes to put the back cardboard on. I�m going to drill out the rivet that holds the old start relay together and see what it looks like inside. For anyone doing a Google search, the relay has two numbers on it, which are 3ARR55M4F1A and 2212964. Hope this helps in the search. Again, thank you Scott, Jerry

Read More
Jerry -
June 30, 2011
A:

I disassembled the old relay. There were no indications that it was defective. There was a slight noise when I shook the relay. This was caused by the metal connectors jiggling against the plastic housing. If you want to take the time to test a relay, Google: "solid state relay" + testing, for testing directions. The refrigerator has been running for two days. Hopefully that will turn into 9 or to years.

Read More
Jerry -
July 02, 2011
See more answers

Top Parts