Model #10670203990 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
  • Freezer Door
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Need dimensions to my refridgerator

A:

Knowing the dimensions of a refrigerator has many uses. Since this is an older refrigerator, if you are looking to comparison shop after hearing from the expert, I attached the link to Sears.com refrigerators below.

Read More
Barbara H. -
February 18, 2012
A:

The dimensions that we have for this model are:

Height 5 feet 8.2 inches Width 2 feet 11.5 inches Depth 3 feet

If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
February 21, 2012
See more answers
Q:

icemaaker has now totally stopped working.

A:

The Refrigerator is one of the most important appliances in the home by far and a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a few questions that is similar to yours. The expert provides further detailed information that might enlighten you. I have provided the link below

Read More
Priscilla V -
April 17, 2011
A:

I know it's frustrating when the icemaker stops working. The information you have received from Pvalde is good but does not pertain to this model. First, make sure the freezer temperature is cold enough. If it gets above 10 degress, the icemaker may not cycle. To check the temperature place a thermometer between some packages. Air temperature is not a good check. If the temperature is too warm, usually adjusting the control to a colder setting, will correct this problem.

This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # 4317943 will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 2315576 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, additional details will be helpful and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
April 19, 2011
See more answers
Q:

ice maker leaks into ice box. makes ice ok.

A:

The Refrigerator is one of the most important appliances in the home by far and a must need. So i am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a few questions that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
April 06, 2011
A:

I'm sorry you are having this problem. You have received some good information from Pvalde. I suspect you may mean there is an icicle hanging from the front of the icemaker. Unfortunately, the model number listed is not a valid model and I will not be able to provide any specific information. However, since the water valve has been replaced and the icemaker still leaks, it indicates the icemaker is either overfilling or the mold has a leak. Most icemakers have a water level adjustment and you can try reducing the water level first. I'm attaching pictures of the 2 most common types of icemakers and how to adjust them. If it does not help, the icemaker will probably need to be replaced. I hope this will help you. If you would like more assistance, please recheck to verify the model number and any additional details will be helpful.

Read More
Scott D -
Sears Technician
April 08, 2011
A:

sorry about model no. should be 106-70203990 turned the screw, get a smaller icicle. should I turn it again? the front crved part gets all frozen up. I defrosted it when it was off but it refroze.

Read More
deb -
April 08, 2011
A:

In most cases, when the icemaker overfills, the water valve is usually the problem. Before replacing the valve, since the icicle is smaller now, I suggest turning it more and if the icicle disappears, it should be ok. If it doesn't or if it does disappear but after a few cycles reappears, the water valve # 2315576 will need to be replaced.

Read More
Scott D -
Sears Technician
April 08, 2011
See more answers

Top Parts