Model #10670070 KENMORE Air-conditioner/heat pump(outside unit)

  • Unit Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Accessory Kit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Accessory Decorator Panel Kit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Sears coldspot model 10670070

A:

I think its great that you are wanting to do some repairs on your own and I will be happy to help. I am adding a link below that will provide you with some detailed instructions to help you with your project. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
January 24, 2012
A:

Thank you for your question. The evaporator will not need to be removed to replace the thermostat. To replace the thermostat on this window a/c, the front grill will need to be removed first and also disconnect the power cord. With the front grill off, pull the unit out slightly to access, the front control panel. Remove the control panel cover and you will be able to see and remove the thermostat. Pay attention to how the thermostat is mounted and how the cap tube is run. Also how the wires connect to the thermostat. Sometimes removing the top cover will help give easier access, to the control panel. I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 26, 2012
See more answers
Q:

re Sears Coldspot air conditiioner Model #10670070

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
January 20, 2012
A:

Thank you for your question. Replacing some parts can be a challenge sometimes. Unfortunately, I do not have diagram that I can send to you but here is the information for control:

  • L1 --- connects to power cord
  • 2 ---- yellow wire to terminal 3 on thermostat
  • 5 ---- green wire to low speed fan
  • 4 ---- both black wires to terminal 1 on t-stat and to solenoid
  • 3 ---- orange wire to high speed fan
  • 1 ---- blue wire to medium speed fan
  • L2 --- other side of power cord and 2 yellow wires to overload and to terminal 1 on de-icer.
I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
January 23, 2012
See more answers