Model #10668902891 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

refrigerator drainage tube

A:

I completely understand your concern over the drain tube in your refrigerator freezing up. I did some research and provided a link to a similar question and answer on our site. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
March 25, 2013
A:

I know that it can be very frustrating to have issues with your refrigerator. Usually when I have refrigerators with finicky drains, I install a drain heat probe. The kit will have instructions included. It attaches to the element itself and transfers heat to the drain hole. this will keep the drain hole from freezing. The round insert will mount into the drain hole and the thick section of the heat probe clamps around the element and then place the tail section into the drain hole. Be sure to disconnect power from the unit before installing the part. You can order the kit from the following link. Refrigerator drain heat probe  If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
March 26, 2013
See more answers
Q:

capacity of kenmore coldspot 10668902891 refrigerator

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
January 04, 2012
A:

Thank you for your question.

I will be happy to assist you. I have looked up the model number you have submitted. The refrigerator is 19 cubic foot model that was made in 1998.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 04, 2012
See more answers
Q:

How do I replace a piece that fell off the crisper in my Kenmore Coldspot refrigerator model 10668902891?

A:

The image below shows the parts diagram for this section of your refrigerator. I am not sure which part that you are referring to. It appears that there is a crisper cover support (Key 15) that should go across the front of the crisper shelf to support it. This parts list may help you determine how to configure the cover and crisper drawers.

Read More
Lyle W -
Sears Technician
July 03, 2009

Top Parts