Model #10664934401 KENMORE Top-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Shelf Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Drying of dishes MDB4409PAB0 Maytag Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model10664934401; you can unplug the dishwasher power cord and remove the heat element when the unit is not hot. With the heat element removed you can test the element for continuity using a multi meter, if the element test reads continuity then the element is ok. If the continuity test reads no continuity then you may need to replace the heat element. The heat element is the part that creates heat in the unit to dry the dishes so when it fails it can cause the dishes not to dry.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 19, 2015
Q:

How many cubic feet is my refrigerator, kenmore model 106.64934401 10664934401 Kenmore Refrigerator

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching model10664934401; based on the model number provided, this model is 19 cu.Ft.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
July 19, 2015
Q:

Refrigerator repair

A:

The refrigerator is one of the most important appliances in the home and by far and a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a question that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
August 08, 2011
A:

If you are getting water dripping from the top of the refrigerator liner the drain might be stopped up in the freezer and the water is overflowing and running through the insulation to the refrigerator liner. If this is the case and you would like to repair it yourself follow these instructions.

Disconnect the power from the refrigerator and remove the food from the freezer. Remove the sliding freezer bottom.

If you have an icemaker, remove it. There are 2 screws above the ice mold of the icemaker, remove them. Pull the icemaker away from the side wall of the freezer and disconnect the wires. Remove the icemaker.

Remove the screws that hold the rear panel in the freezer and remove the panel. You now have access to the evaporator coil and the drain pan underneath it.

Defrost the ice from the evaporator drain pan with a hair dryer. Don't use a sharp object to remove any frost or ice from the evaporator coil. The evaporator coil is made of aluminum and is easily punctured.

When the drain pan is defrosted and water runs through it pour 1/2 cup very hot water through the drain to clean it.

The condensate drain pan in the compressor compartment might overflow during this operation. Put some towels in front of the refrigerator to catch any water.

Read More
Jimmy K -
Sears Technician
August 09, 2011
See more answers

Top Parts