Model #10660867990 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Liner
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

need cubic feet 10660867990 Kenmore Top mount refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
April 29, 2013
A:

Thank you for contacting ManageMyLife.com regarding the capacity of your Kenmore refrigerator. I'm happy to help you today. This unit has an overall capacity of 18 cu. ft.

I really hope this information helps you today. Thank you for using ManageMyLife.com.

Read More
Korinna S -
Sears Technician
April 30, 2013
See more answers
Q:

Heater location

A:

It can be difficult locating a part within your refrigerator. I can see why you would need some help. I was able to find the diagram for your model on the Sears Parts Direct website. I attached the link below. I hope this helps.

Read More
Jackie S -
April 23, 2012
A:

Thank you for your question. The heater (# 4 in picture) in this refrigerator is located under the evaporator (# 5). The back panel in the freezer will need to be taken out, to access the heater. This will require removing everything in the freezer. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
April 25, 2012
See more answers
Q:

What is causing the water to leak into the refrigerator?

A:

Water will leak into the refrigerator when the drain system freezes up. Every time the unit goes into a defrost cycle, water will run down into the refrigerator, instead of down the drain. To clear the drain, remove everything in the freezer so the back panel can be removed. With the panel removed, you will see the evaporator coil and directly under the coil is the drain trough (pan). The trough will probably be full of ice that will need to be removed. With the ice out of the trough, you will be able to see the drain hole which will be plugged with ice. Use hot water to clear the drain hole. Keep working the hot water into the hole and wiping the excess water. This can take quite awhile depending on how deep the ice is. This will need to be done until you get a good water flow down to the bottom drain pan. With the drain system clear, water should stop leaking in the refrigerator.

Read More
Scott D -
Sears Technician
April 16, 2009

Top Parts