Model #10660832100 KENMORE Top-Mount Refrigerator

  • Cabinet
    3 Results
  • Freezer Door
    3 Results
  • Shelf
    3 Results
  • Liner
    3 Results
  • Unit
    3 Results
  • Refrigerator Door
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore refrigerator model 10660832100 10660832100 Kenmore Top mount refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Trouble knowing size of refrigerator and how old it is?

A:

I can appreciate you need for this information. Using your model number I have been able to locate 2008 top freezer units that state they are 18.2 cubic feet. 14.1 cubic feet for the refrigerator and 4.1 cubic feet for the freezer. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
May 19, 2013
A:

Thank you for your question. It's nice to know the size of your fridge. This is an 18 cubic foot model and was produced in 2001. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
May 21, 2013
See more answers
Q:

Kenmore Coldspot Model # 106.60833100 refrigerator/freezer intermittently cooling/freezing.

A:

Good morning... I can fully understand your concern regarding this issue. Most units I've research would be under the heading of not cooling at all. The fact that yours alternates is unique. I did locate a link that will discuss your situation in greater detail, though I'm not sure it will apply to you. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your refrigerator and have a nice day.

Read More
Henry -
May 03, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

The problem sounds to be the defrost system faulty.   The heater is controlled by the defrost bi-metal and the ADC board.  Voltage comes from the board through the bi-metal to the defrost heater. 

This repair will require the use of a multimeter and some live voltage checks.  If you are willing to run the checks we will assist you with the checks or the faster way is to have a Sears Home Service technician out to repair the refrigerator. 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
May 06, 2013
A:

Thanks Bill. Just to verify, my model # is 106.60832100. Also, since my original post the refridgerator has been working until yesterday when I moved it again. Do u think its still the defrost system or could it be a Start Relay. Either way, what would these repairs cost me to have a sears tech come out vice doing it myself. Is there a certain type if multi meter needed, would u be able to walk me through testing and repair. Thank you so much.

Read More
NavySeniorChief -
May 06, 2013
A:

Yes, more to the wiring or connections. The compressor uses the start relay and if it is not working the unit would thaw out top and bottom. The cost of a trip is variable from region to region but around 100.00 + part and time. The multimeter just needs to be able to check up to 240 volts and 10,000 ohms the cost is less than 20.00 usually. And I sure would assist you.

Read More
Bill__W -
Sears Technician
May 10, 2013
A:

Alright Bill I have the multimeter and just need to know how to go about running the checks. Plan to take the back access cover off in the morning to check. Hopefully I have something from you by then. All your help us much appreciated.

Read More
NavySeniorChief -
May 10, 2013
A:

Here is some infor to get you started.

Read More
Bill__W -
Sears Technician
May 11, 2013
A:

Bill I have the assembly out. Please give the next steps to check and repair. Maybe even what to do in case it's the start relay. Im a Navy Engineer and pretty good and good and following. Thank you so much for your time.

Read More
NavySeniorChief -
May 11, 2013
A:

Ok, at the ADC board with the unplugged from the wall, jumper the black to the pink and plug the refrigerator in. The use the meter to check the orange wire to the white wire looking for 120 volts AC reading should be 120 VAC , if it is 0 Volts AC replace the bi-metal at the heater.

Read More
Bill__W -
Sears Technician
May 11, 2013
A:

Is the ADC board in the assembly I took out or under the back of fridge. What do I use to jumper the wires. Am I understanding that once I jumper the wire I plug fridge back in.

Read More
NavySeniorChief -
May 11, 2013
A:

The ADC board is in the refrigerator section on the roof. Everything is done from the board behind the control panel. Yes then plug it back in after the jumper is installed. Then the defrost heater should come on and you can test the orange to white wire.

Read More
Bill__W -
Sears Technician
May 11, 2013
See more answers

Top Parts