Model #10660234900 KENMORE Top-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Door Parts
    3 Results
  • Liner Parts
    3 Results
  • Unit Parts
    3 Results
  • Shelf Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Roller replacement on a Kenmore refrigerator 10660234900

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

If this is a front roller, you need to remove the front grille below the door. Then pull the refrigerator out about a foot. Have someone help you tip the refrigerator back so that a 2x4 can be slid under the side. Place the 2x4 about 5 inches back from the front. Then locate and remove the screws securing the roller to the cabinet. The roller should drop out from under the refrigerator. Then install the new roller under refrigerator reverse theses steps.

If this is a rear roller, place the 2x4 about 5 inches from back of the refrigerator. Then unplug the unit and remove the back cover. Depending how the rivet is held in, you might have to cut the old rivet with a hacksaw. Then install the new roller using a screw/bolt and nut that is the same size as the rivet. This is easier than installing the rivet. 

Hopefully this will help with a seamless install of either front or rear roller on the refrigerator. Let me know if I can be of any further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
October 08, 2013
Q:

Is this Kenmore Coldspot 21 cu ft top mount refrigerator model 106.60234900 an Energy Star model

A:

The Sears.com website is very helpful to review facts about your appliance. I have provided the link below. I hope this helps!

Read More
Jacqueline S -
September 27, 2010
A:

This model is showing to be an Energy Star model (see attached information) .

Read More
Scott D -
Sears Technician
September 28, 2010
See more answers

Top Parts