Model #10659792992 KENMORE Side-by-Side Refrigerator

  • Cabinet
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Shelf
    3 Results
  • Freezer Liner
    3 Results
  • Motor And Ice Container
    3 Results
  • Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Dispenser Front
    3 Results
  • Air Flow
    3 Results
  • Control
    3 Results
  • Unit
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Freezer temp fluctuates. 10659792992 Kenmore Side-by-side refrigerator

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Alina -
March 29, 2013
A:

Thank you for contactng Sears Parts Direct with your refrigerator question Janine. I am so sorry to hear you are having a continuing problem with the temperature on the freezer side of your refrigerator. There are a few things I would recommend checking to help narrow down the problem. I have included the parts diagrams for your model to help direct you to where the parts are located.

Parts digrams for model 10659792992.

You had mentioned that you try to keep the vents clear. That is important to keep the air circulating and keep the refrigerator from overheating. On the cabinet page, check and see that the unit cover (key 22) on the back of the refrigerator isn't clogged with dust. If you see a lot of dust on it, you will want to unplug the refrigerator before cleaning it. The best way to clean the dust off of the refrigerator is with a coil brush.  I have included that link in case you don't have one. It does come with instructions.

Refrigerator coil brush.

Never use a vacuum cleaner directly on the refrigerator as it can damage the coils. . If you see a large build up of dust, you probably also have a dirty condenser assembly (key 3 on the unit page). Use the brush to clean those also. A dirty condenser doesn't allow the refrigerator to cool the freon before it enters the compressor. That can cause the system to warm up.

Check the fan inside the freezer to make sure it is running and the vents to that are not blocked. (Key 7 on the air flow page.)  I also recommend removing the unit cover on the back of the refrigerator to access the compressor and the compressor fan. See if the fan is working. Also CAREFULLY check if the compressor is hot to the touch. If the fan is running and the compressor is hot to the touch you most likely have a sealed system problem and will need a technician for the repair. Just in case, I have included the link to schedule a technician visit.

www.searshomeservices.com

If it is not a freon issue and you want to complete the repair yourself I recommend investing in our do-it-yourself repair manual. It will take you through a repair with step-by-step instructions and photos.

Repair manual for Kenmore side-by-side refrigerators.

If I can be of further assistance please respond to this thread. Thank you for choosing Sears Janine, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
March 29, 2013
See more answers
Q:

Need help with diagnosing ice maker issue. Can I manually cycle the unit on?

A:

Troubleshooting ice makers is easier with diagnostic help. The expert will review and respond within 24-48 hours if not sooner. If you decide to schedule a technician, I attached the link to Sears Home Services below. I hope this link is helpful if needed.

Read More
Barbara H. -
February 11, 2012
A:

UPDATE I did manage to test the inlet valve by jumping the V and L holes in the control module, and the water did fill the reservoir. So I guess leaves the control module. Will part# W10190935 suffice, or is there something else I should buy along side it? Also, does the part come with installation instructions?

Read More
Chris -
February 11, 2012
A:

Thank you for your question. I know it can be disappointing when the icemaker stops working. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the T - H terminals. Be careful this is a hot (live) check. With the jumper in place, the icemaker should start into a cycle. After approx. 15 seconds remove the jumper and toward the end of the cycle, it should fill with water.

I see you have jumped the L & V terminals and water did flow. The module you have listed will correct this problem but I would recommend replacing the complete icemaker # 4317943. The module is almost the same cost and then you would still have an older icemaker. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
February 13, 2012
See more answers
Q:

Can I get the cubic feet and energy ratings of a refrigerator and freezer?

A:

The refrigerator is a 27 cubic foot side by side. The freezer is a 13 cubic foot upright manual defrost freezer. The energy guides are not available for either unit.

Read More
Scott D -
Sears Technician
June 22, 2009

Top Parts