Model #10659126800 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

What would cause my ice dispenser to not dispense any ice?

A:

If the augur motor is running and not pushing any ice out of the dispenser I would have to assume that there is a blockage somewhere within the bucket or in the crusher housing. Pull the bucket out and confirm that the augur motor is actually running and not just humming. Open the freezer door, press and hold the door light switch in while pushing the ice dispenser lever. You should see the auger motor running. If it runs, I recommend emptying the ice bucket into a bowl and then running warm water throughout the ice bucket to thaw any ice that may be jammed inside the crusher housing. Dry the bucket and then add the ice back into the bucket. Reinstall the ice bucket and then see if it will dispense the ice.

Resubmit your question with additional details if needed for further assistance.

Read More
Joey S -
Sears Technician
November 03, 2008
A:

Great suggestion... what to do when auger motor doesn't run when steps completed?

Read More
Ebonwolf407 -
September 28, 2010
A:

I have the same questions as above..

Read More
John -
April 21, 2011
A:

I did as suggested and the auger motor is actually running, but the auger drive is not (bucket was removed). What now? Could I remove the divider to get at the motor and drive to see what is going on?

Read More
Dennis -
June 26, 2011
A:

Hi there I got the same problem. I just installed a new ice maker wich is working fine. but the dispenser wont turn to push I did open the door and hold the switch so the ice dispenser would work but iit just makes an initial sound and click but won turn Should I remove the inside and put wd-40? please let me know. thanks

Read More
carlos -
July 23, 2012
See more answers

Top Parts