Model #10658999800 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Moweer cut even whhen going straight but scalps on one side when turning 10658999800

A:

Thanks for the inquiry and for being a valued member.
 
Unfortunately, I do not see that the manufacturer (MTD) has produced a gauge wheel kit for 30" decks. I have seen mentions of others fabricating gauge wheels on 30" decks by drilling mounting holes into the deck and purchasing MTD specific gauge wheels. You could look online and do some research on it if interested.
 
I would recommend attempting to level the mower deck as described on page 29 in the owner's manual. If that doesn't help, check the links on the deck and make sure they are attached and that there is nothing worn/bent. 
 
I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 16, 2015
A:

Thanks for the inquiry and for being a valued member.
 
Unfortunately, I do not see that the manufacturer (MTD) has produced a gauge wheel kit for 30" decks. I have seen mentions of others fabricating gauge wheels on 30" decks by drilling mounting holes into the deck and purchasing MTD specific gauge wheels. You could look online and do some research on it if interested.
 
I would recommend attempting to level the mower deck as described on page 29 in the owner's manual. If that doesn't help, check the links on the deck and make sure they are attached and that there is nothing worn/bent. 
 
I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 16, 2015
See more answers
Q:

Ice not being dispensed down chute

A:

Ice is a great refrigerator feature when the weather gets warm. I see you have already attacked repairs for this issue and still have problems. The expert will review this model and respond specifically. I did locate two similar questions that may offer some clues. I attached below. I hope these links help.

Read More
Barbara H. -
May 12, 2012
A:

Thank you for your question. I know it can be disappointing when the ice dispenser stops working. If you can hear the auger motor running but no ice is coming down the chute, check the coupling (# 8 in picture) that attaches to the auger motor shaft. Sometimes this coupling will be loose and spin free. If it is loose, the coupling # W10169511 will need to be replaced. In this case, also check the threads on the motor shaft. If the threads are stripped, the motor # W10317991 will also need to be replaced. It will be similar to the solenoid. The coupling on this motor has reverse threads, so to remove it, turn the coupling clockwise and counterclockwise to replace it. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
May 16, 2012
See more answers
Q:

Changing out solenoid, Kenmore Cold Spot

A:

Step by step directions is helpful and the experts will review this model and respond within two business days if not sooner. If you run into further problems or would like help with this repair, an option is Sears Home Services at the link below.

Read More
Barbara H. -
May 10, 2012
A:

Thank you for your question. Replacing some parts can be a challenge sometimes. To replace this solenoid, first disconnect power to the unit and remove the ice bucket. With the bucket out you will see the cover (# 1 in picture) for the auger motor (# 2) and the solenoid (# 3). Remove the cover and now you will have access to the solenoid. Remove the screws holding the solenoid, disconnect the wires and remove the solenoid. Reverse the procedure to replace the solenoid. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
May 11, 2012
See more answers

Top Parts