Model #10658963705 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

how do I replace the ice maker STRIPS ARM

A:

Detailed instructions can really come in handy when replacing a part on your ice maker and I will be happy to help. I did some research and I was able to find a link that will guide you with your project. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
April 13, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

The best way is to disconnect the refrigerator from the wall outlet and remove the icemaker from the side wall by loosening the two mounting screws.  Disconnect the power core to the icemaker at the icemaker by using a small flat blade screwdriver.  Remove the plastic cover, No 1 and this will expose three screws, remover the screws and remove No 2.  This will expose two sliver screws ant the bottom of the housing.  Remove both of the screws and pull the housing off.  Now you can replace either the ejector or the ice stripper.  Reassemble in reverse order.   

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
April 15, 2013
See more answers
Q:

Kenmore Elite 10658963705 Ice dispenser flap was not shutting discovered it was broken plastic in the dispenser housing. This is not a serviceable part.

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner. Have a great day!

Read More
Alina -
August 11, 2012
A:

Thank you for your question. I understand your concern about the broken dispenser tab. There is a kit now that will repair this type of problem, without having to get a whole new door. The kit # 8201756 is available at http://www.searspartsdirect.com/partsdirect/part-number/8201756/0046/106?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=8201756&sid=MMLxexpertxmerch and it will come with instructions. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
August 13, 2012
See more answers
Q:

Ice Maker - Kenmore Elite Side by Side refrigerator Model #106.58963705. August 9, 2012 12:18 pm

A:

It's great that your doing this repair yourself and saving $$$. I did some research and found a link that talks about a ice door repair kit. Review this helpful information while you're waiting for an expert response. I hope this helps you in your endeavor.

Read More
Henry -
August 09, 2012
A:

Thank you for your question. Based on the information listed, I suspect you need a diagram of the dispenser instead of the icemaker. Unfortunately, there is not a diagram of how to install the chute door spring. I�m attaching a couple of pictures that shows the spring with the original design and the updated design. I�m also attaching a picture with instructions of how to remove the front panel (second image). Be sure to disconnect the power first. With the cover off, you will be able to remove the bracket control (# 14 in third image) and this will allow you complete access to the chute door. I hope this will help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
August 10, 2012
See more answers

Top Parts