Model #10658732800 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Filter Replacement for Kenmore Coldspot Refrigerator Model # 106.58732800

A:

Having the filter stuck can be a frustrating ordeal. I was able to locate a link where there are ideas on how to take the filter out. Hopefully it will assist you further.

Read More
celene -
November 08, 2012
A:

Thanks for the inquiry about removing the filter on your refrigerator model 106.58732800; I will be glad to assist you.
Removing this filter can be frustrating sometimes. Here are some tips to help: (Turning the water supply off may reduce pressure on filter) First the filter does not turn or twist when removing, it just pulls straight out. Pushing in the button can be made easier (when the filter seems stuck) by using the end of a broom stick because it gives more leverage to push. Place the end of a broom stick onto the button and push, at same time pull straight out on the filter. It should slide right out.
When installing the new filter apply a very small amount of petroleum jelly to the end of the filter that inserts into housing, and this will make the next removal a bit easier.
I hope this will help, should you need additional assistance please reply with more details and I will be happy to respond.

Thanks Ron H.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Ron H -
Sears Technician
November 09, 2012
See more answers
Q:

refrig model # 10658732800 ice not dispensing from door no crushed or cubed also inside of mold has been peeling the coating inside

A:

I know how it can be disappointing when it comes to the refrigerator ice dispenser not working. I have done some research on the Manage My Life website and have located a similar link towards your issue. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
May 31, 2012
A:

Thank you for using Manage My Life.

If the problem is no ice, cubed or crushed, that could be a problem with the auger motor. The auger motor is located under the ice bucket, on the inside of the door. It can be located by removing the ice bucket and panel under the ice bucket. The power to the motor should be checked and if there is power is to the motor that would be the problem. Power is checked by pressing the ice dispenser lever while using a multimeter to check for the volts at the motor. If you feel comfortable doing this problem, I will assist you on how to make the volts measurements. If you do not feel comfortable and want the refrigerator fixed by a professional servicer I provide you with this link where you may schedule service. : Sears Home Services .

If you have already determined that the auger motor is bad, here is the link to order the Auger motor: [| http://www.searspartsdirect.com/partsdirect/part-number/C8946703/0046/464&pathTaken=partSearch&blt=14&prst=0&shdPart=C8946703&sid=MMLxexpertxmerch] .

If the ice mold coating is coming off the ice mold, a new mold or the complete ice maker can be replaced. This is the best way to keep the peeling off particles from getting into the ice. You may order it form this link: Ice maker kit .

I hope this is helpful. If I may be of further assistance please reply to this thread.

Read More
Bill__W -
Sears Technician
June 04, 2012
See more answers
Q:

refrig model #10658732800 where is defrost timer located?

A:

Having to locate parts on your refrigerator can be tricky. I have done some research on the Manage My life website and have located a link quite similar to your question. While you are waiting for a detailed reply from an expert i have provided the link below. Hope this ehlps!

Read More
Priscilla V -
May 31, 2012
A:

Thank you for your question. Locating some parts can be a little tricky sometimes. The defrost timer in this model is a control board (# 28 in the picture) and is located in the control housing. I hope this will help you.

Read More
Scott D -
Sears Technician
June 01, 2012
See more answers

Top Parts