Model #10658154800 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a Kenmore refrigerator Model 106.58154800 purchased in late 2008. The ice maker W10190961 has been leaking or overfilling.

A:

With the refrigerator ice maker leaking can be quite an inconvenience,especially this time of season. I have done some research on the Manage My Life website and have located several links towards your issue. While you are waiting for a detailed reply from an expert I have provided the links below. Hope this helps!

Read More
Priscilla V -
April 29, 2012
A:

Thank you for your question. I'm sorry you are having this problem with your icemaker. The overfilling problem is normally due to a defective water valve # W10408180 but it could also be caused by the icemaker. However, the plastic material is very unusual. If you could send a picture of this, it would be very helpful. The icemaker may need to be replaced. I would recommend having a technician check this. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
May 01, 2012
A:

Ok - how does one acquire a parts breakdown of the ice maker? Owners manual does not contain one.

Read More
Thomas -
May 02, 2012
A:

Thomas, I'm attaching a picture of the icemaker parts. I hope this will help you.

Read More
Scott D -
Sears Technician
May 02, 2012
See more answers
Q:

Ice maker overflowsand freezes on side of freezer?

A:

I understand how frustrating it can be to have a ice maker that is constantly overflowing. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
April 20, 2012
A:

Thank you for your question. I can understand your concern about the water to the icemaker overflowing. If the water flow from the dispenser is ok, the water filter will also be ok. This could be a problem with the water valve or just adjusting the water fill on the icemaker may help. I'm attaching a picture with instructions to adjust (lower) the water fill on this icemaker. If it still overflows, the water valve will need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
April 23, 2012
See more answers
Q:

Why won't the refrigerator section cool?

A:

This type of problem is usually due to poor air flow. It could be caused by a restriction in the return air vent, the damper may need to be adjusted or it could be a defrost problem. If you notice a thick frost build up on the back wall in the freezer it will be a defrost problem. As the frost gets thicker the fridge will get warmer and eventually the freezer will stop freezing. If there is no frost build up, the damper may just need to be adjusted or the return vent is restricted. You can check this by feeling the air flow coming out of the diffuser. If it feels weak or no air flow at all, open the freezer door. If the air flow increases with the freezer door open, it indicates the return air is restricted. In this case first check in the refrigerator section, if there is something blocking the louvered vent. If there is, just move it but if there is nothing there, it means the vent is iced up. This can happen if some air leaks inside the cabinet. To clear this, you will need to turn the unit off for a few hours to allow it time to thaw. Air could be leaking inside if the door is not sealing good. Check the door gasket and if there are any gaps, you can use a hair dryer to smooth them out. Just be careful not to get the gasket too hot. If you need more assistance, please resubmit your question, with additional details.

Read More
Scott D -
Sears Technician
March 17, 2010
A:

the vent in the refrigerator side keeps icing up. Everytime we defrost it.

Read More
charles -
February 06, 2012
See more answers

Top Parts