Model #10658153800 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why did my fridge stop working after a power outage?

A:

I found some information for you that I am hoping will help you until your expert answers your question. Please click here: [Power Outage]. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
April 12, 2013
A:

Thank you for your question. I'm sorry you are having this problem with the compressor. If the condenser motor is running but not the compressor, it will indicate a problem with either the compressor itself or the starting device on the compressor. If you have a meter the compressor windings can be ohmed out (see video attached) to see if there is an open winding. Be sure to disconnect the power first. If the windings check ok, the compressor could still be stuck. Now, also check for a burnt wire or relay on the compressor. If the wires and relay seem ok, it can be very difficult to determine, if the starting device or compressor has failed. You can take a chance and replace the starting device # W10128791 and capacitor # 2169373. If the compressor still won't start, then the compressor would need to be replaced. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.   

 

Read More
Scott D -
Sears Technician
April 15, 2013
See more answers
Q:

Ice bin latch 10658153800 Kenmore Side-by-side refrigerator

A:

Good morning.... I can understand you concern of disengaging the spring from the housing.... I did find a link that will discuss how to re-engage that spring on a model very similar to yours. Keep in mind that an expert will also be responding within the next two business days if not sooner. I hope this helps you resolve your latch problem and have a nice day

Read More
Henry -
November 27, 2012
A:

I know that it can be very frustrating to have issues with your ice bin. First line up the latch without the spring. This will make it easier to see where it goes.

There are two notches on the lever that will line up with two tabs on the bin. line these up and the latch will drop down into the slot. The level must be pushed all the way to the side to mount.

The spring will mount on a post located on the latch. The spring will have to be depress all the way to get the latch to fit. The image below will show you what it should look like when completed. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 27, 2012
See more answers
Q:

Refrigerator starting watts

A:

I know how important it is to have detailed information about your refrigerator to make sure you have the correct generator to power the refrigerator. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
October 25, 2012
A:

Thanks Joseph

Read More
Erik -
October 25, 2012
A:

Thank you for your question. I understand your concern about wanting to know the wattage. The information you have received is very good. This unit will be very similar. The running wattage however can and will vary between 140 � 170 watts. The start up wattage will triple for a millisecond as indicated and the heater wattage on this model can vary from 550 to 650 watts. I hope this will help you.

Read More
Scott D -
Sears Technician
October 26, 2012
See more answers

Top Parts