Model #10658144800 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Icemaker Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

need help

A:

I understand that you need help with working the ice maker on your new refrigerator. I have found a copy of your owners manual here on the Manage My Life website, which I have attached in the link below for you to view. I hope the link that I provided is helpful. Have a great day!

Read More
Alina F. -
March 23, 2012
A:

Thank you for your question. I will need more details as to what type of problem you're having. I'm not sure what you mean by, what department the water and ice goes in, for things to work properly. If the icemaker is not working, the problem could be with the icemaker itself, the water valve or the optic boards. This can be a complicated unit to diagnose and I would recommend having a technician check it. If you would like more assistance, reply to this thread and please include more details and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
March 26, 2012
See more answers
Q:

Icemaker in Kenmore refrigerator

A:

A Refrigerator is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
November 29, 2011
A:

I know any problem with the ice dispenser can be frustrating. It sounds like the ice dispenser mechanism is not working to deliver ice through the door. However you did not mention if you can hear the motor running when the paddle is depressed. If not, you could have a bad switch or a failed motor. A technician would normally need to diagnose and fix this type of failure. If the motor does run, check to see if the door for the ice dispenser is opening to allow ice to fall through. If not, you probably have broken parts in the dispenser assembly that will need to be replaced. The image below will provide a diagram of the internal parts. Here is the procedure for accessing the internal parts of the dispenser:

  1. Disconnect electrical power to the refrigerator by unplugging it.
  2. Remove the OVERFLOW GRILLE (KEY #9) from the bottom of the dispenser.
  3. Remove the 2 screws that hold the FRONT COVER (KEY #21) to the dispenser housing.
  4. Lift the FRONT COVER up and off. It will have several wires connected to it. You should be able to complete the work without disconnecting these wires. If you do need to disconnect them, pay close attention to the location of the wires so that they can be replaced properly. Move or position the front cover out of the way.
  5. Remove the 2 screws (KEY #22) that hold the CONTROL BRACKET (KEY #15) to the dispenser housing. Pay close attention to how the CONTROL BRACKET is positioned in the dispenser housing. It will need to be replaced properly.
  6. Pulling the CONTROL BRACKET out should give you access to the internal parts of the dispenser.

You should be able to determine what part is need for the repair.

If you need further assistance, please reply to this thread.

Read More
AnneJ -
Sears Technician
November 30, 2011
See more answers
Q:

Kenmore fridge model 10658144800 wiring question ?

A:

Wiring can sometimes be tricky. While your waiting on an expert response you can visit the SearsHomeServices website to schedule service. I have provided the link below. Good luck!

Read More
Jacqueline S -
August 29, 2010
A:

The policy we are bound by states we can not modify any product to operate outside the original manufacturers specifications.

I see you have the wiring schematic for the refrigerator. Any wiring changes you make are your responsibility and you can do anything you choose to your refrigerator.

To install the switch you indicate is something we can't do or help you do.

I apologize for not being able to help you.

Read More
Jimmy K -
Sears Technician
August 30, 2010
See more answers

Top Parts