Model #10657783701 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Filter or filters 106.57783701

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Based upon model 106.57783701, the water filter part number is 4396841. It appears these are also sold in a 3-pack as part number 4396841T. There used to be a double pack as part number 4396841P, but I don't see that is still a viable option through Sears.
I do not see an applicable air filter for this model, so I would refer to the part numbers give above to order the water filter. 
Hope this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
March 08, 2014
Q:

Kenmore Elite side by side Model# 106.57783701 Ice dispencer not working.

A:

I understand your Kenmore Elite Side by Side Refrigerator Ice Dispenser is not working, your looking for a service manual. I understand your a HVAC Tech which is great for you to save money, and do it yourself. While your waiting on an expert to send you the service manual or instructions, maybe you can take a look at Sears Parts Direct website and purchase any needed parts easy online. I attached the link below, I hope this help!!!!!!!

Read More
Raquel F -
August 20, 2010
A:

This can be a very complicated dispenser to check. I'm sending you some pictures with instructions to access the dispenser and some check points on the components. You can also check the br/wh and rd/wh wires on the motor. Be careful, this will be 120v dc (see wire diagram) and must be made with the wires still connected. If this voltage is there but the motor does not run, the motor # 2252130 will need to be replaced. If the voltage is not there, the core board # 2303843 will need to be replaced. These parts are available at SearsPartsDirect . I hope this will help you. If you would like more assistance, additional details will be needed.

Read More
Scott D -
Sears Technician
August 23, 2010
See more answers

Top Parts