Model #10657716701 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Control Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Elite 106.57 not dispensing ice

A:

"Break up ice that forms around the auger on the ice maker with a plastic utensil or your fingers if the ice has developed clumps." Thank you. I tried this before and it didn't affect the operation. I tried it again, and now the dispenser works. (Its also been a few days since i had last tried the machine). This may be an intermittent issue. Previously, if the ice collection bin was removed, and the button for the compartment light pressed (as if the door was closed), the motor would not function. Now it is functioning again using this same test. I will monitor it to see if the problem returns.

Read More
Ken -
July 12, 2013
A:

I can confirm this did *not* fix the problem. It was working earlier today but has stopped working again. The auger does not turn, nor does it sound like the motor is trying. At first it seems to, but then doesn't on subsequent tries. I've also tried this with an empty ice basket with the same result.

Read More
Ken -
July 12, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. If the auger motor is not turning, the issue could be with the auger motor (2252130) or the auger motor couplings (2220458 and 2220457). Check the coupling for wear or damage. If the coupling is good, if you have an ohms/colt meter you can perform testing on the auger motor to verify the part. The auger motor uses 120 volts DC. To check the voltage on the motor, leave it connected, press the dispenser lever and check the BR/WH and RD/WH wires on the motor. Do not disconnect any wires. Remember this is DC voltage not AC voltage. Be very careful when making this check, it can be dangerous. If the voltage is there, the motor will have to be replaced. If there is not 120 volts DC then the dispenser board may need to be replaced. The image below will help you access these parts ad provide more testing informaiton. You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
July 13, 2013
A:

Thank you. I think my ice dispenser is different from the ones in the drawings, as mine does not have the motor cover housing described in the document. The bottom of the door unit is fully molded and solid down to the bottom, above the shelf below it. The coupling at the top is the new style, and this area appears to be the only access into the dispenser housing. Unfortunately I cannot see an obvious way to make access into the dispenser housing. See the images attached.

Read More
Ken -
July 18, 2013
See more answers
Q:

Cubic Feet

A:

It could be useful to have the cubic feet of the refrigerator.  While you are waiting for an expert to respond, I have added a helpful link that may provide information to assist you with your question.

Read More
Yadira B -
June 06, 2013
A:

Thank you very much! I will have to check that out in a little bit. It would be nice if they would include that information right by the model number on the inside of the frig. Have a great day!

Read More
Lara -
June 06, 2013
A:

Thank you for your request of the size of your refrigerator. I am happy to help.

Your model is a 25 cubic foot side by side refrigerator/freezer.

Please feel free to let me know if you need further assistance. Thank you for using ManageMyLife.com.

 

Read More
Bobby B -
Sears Technician
June 06, 2013
See more answers
Q:

Ice maker section falling off

A:

The problem with the ice maker seems like an easy fix. I would suggest that you provide the model number of your product so your expert will be able to provide you the best possible answer. Share any insightful information that could be helpful. Just click on the reply box below and provide that information.

Read More
Yadira B -
August 30, 2012
A:

Kenmore Elite 106.57716701

Read More
Kelly -
August 30, 2012
A:

Parts anywhere on a refrigerator can be difficult to reinstall. I wish I had better news but this will take some work.

The stripper on this icemaker has a screw on the right end and the left end fits into a groove on the module. You can view in the image below.

Before attempting any repairs or service, disconnect power to the refrigerator.

To replace the stripper on the most common icemakers used, you will need to remove the icemaker. Pull off the front cover and remove the 3 screws holding the module. With the module off, now remove the 2 screws holding the housing in place. Pull the housing away from the mold and you will be able to remove and replace the stripper. Now you can reassemble the housing and module.

I hope this helps. If you need further assistance, reply back to this thread with additional detail. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
August 30, 2012
See more answers

Top Parts