Model #10657704704 KENMORE ELITE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Control Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Why is my water dispenser not dispensing the correct amount of water?

A:

The smart valve # W10159839 controls the amount of water flow. There is a flowmeter inside the smart valve and if it fails, the dispensing will be erratic. The valve will need to be replaced (see picture) and is available at SearsPartsDirect . If you need more assistance, please resubmit your question, with additional details.

Read More
Scott D -
Sears Technician
March 03, 2010
Q:

How to remove the drip pan on my refrigerator?

A:

The drain pan on this model will slide out from the front but it's a tight fit. First disconnect power from the unit. Remove the bottom grill and tilt the unit backward slightly. Tilting it back will make it easier to access. Remove the wire gate in front and the pan should slide out but sometimes the filter housing needs to be taken loose and moved slightly. To take the filter housing loose remove the front 2 screws holding the housing. If you still experience a problem, then pull unit away from the wall and remove the back cover panel. With the cover removed you will be able to see the condenser motor and next to it the drain pan. If you can't pull the drain pan out, remove the condenser motor and bracket and the drain pan should slide out.

Read More
Scott D -
Sears Technician
July 27, 2009

Top Parts