Model #10657036600 KENMORE Side-by-Side Refrigerator

  • Cabinet Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Shelf Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Motor And Ice Container Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Dispenser Front Parts
    3 Results
  • Air Flow Parts
    3 Results
  • Control Parts
    3 Results
  • Unit Parts
    3 Results
  • Icemaker Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

what is the cubic foot of this refrigerator? 10657036600 Kenmore Side by side refrigerator

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kenmore Refrigerator model 10657036600. I will be happy to help you with the cubic feet of your model.
 
The measurements are as follows:
 
Freezer Section - 10 cubic feet
Fresh Food Section - 15.4 cubic feet
Overall Capacity - 25.4 cubic feet 
 
I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
July 08, 2014
Q:

how do i remove the inside door to tighten the handle 10657036600 Kenmore Side by side refrigerator

A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to be able to fix a loose door handle. The inner side of the door cannot be removed to fix a loose handle. To remove the handle, apply firm pressure on the handle and slide up and off. This will expose the clip on the door (key #4 on image below). Make sure the clips are screwed in tightly. If loose, check the screws, handle and clip to see if they are stripped and replace as necessary.
If you are viewing this response on Sears PartsDirect and are unable to view the image, copy and paste the following web address to a seperate internet browser:
http://www.managemylife.com/mmh/questions/358759-remove-inside-door-tighten-handle-10657036600-kenmore-side-side-refrigerator
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Lokelani -
Sears Technician
September 03, 2013
Q:

How do I clean the coils under my refrigerator?

A:


First, unplug the refrigerator from the wall before removing the rear panel and the base grill.

You access the condenser coils from the front and rear of the refrigerator. You will need a condenser brush to aide in the cleaning of the condenser coils. Use the condenser brush to clean the lint off the condenser coils while using a vacuum cleaner with the crevice tool and brush attachments. Clean the front base grill too. Re-install the rear access panel and base grill when finished. Plug in refrigerator or reconnect power.

Part number for the condenser coil cleaning brush is 4210463. It can be ordered thru Sears.com.

Read More
expert -
Sears Technician
December 13, 2007

Top Parts